1998-079 - Laserfiche WebLink

Home Browse Search

C. Drainage Plans 1. Drainage Parameters: Perform drainage investigations and analysis necessary to prepare a design which will drain the project in accordance with the County, SJRWMD, and IRFWCD design criteria. The drainage design shall include stormwater treatment and attenuation in accordance with the requirements of Indian River Farms Water Control District, Indian River County, and St. Johns River Water Management District. 2. Environmental Permits: The Engineer shall prepare stormwater permit applications for the St. Johns River Water Management District, US Environmental Protection Agency, and Indian River Farms Water Control District requirements for submittal by the County. This will consist of all required evaluation, design, coordination, and follow-up work necessary to supports permit application. The County will review the permit applications as necessary and be responsible for the final submittal. The Engineer shall prepare permit sketches for submission by the County to Florida Department of Environmental Protection, U.S. Army Corps of Engineers, and St. Johns River Water Management District for Dredge and Fill activities, if necessary. The Engineer shall submit all permit sketches on 81/2" x 11" sheets. Sketches must be neatly scaled, signed and sealed, and reproducible. 3. Utilities: Utility coordination with the various Utility Companies and/or agencies shall be by the Engineer and identified conflicts addressed. The Engineer will be prepared at additional hourly rates to survey the project site to locate and determine depth of underground utilities, in coordination with the utility companies. D. Signing and Pavement Marking Plans Preparation of the plan layout; key map; quantities (including signing and pavement marking quantity); tabulation of quantities; and detail of all major signs. All plans are to be prepared in accordance with the latest design standards and practices (MUTCD), FDOT Standard Specifications, Indexes, and shall be accurate, legible, complete in design and drawn at 1" = 40' scale, furnished in reproducible form. E. Signalization Plans 1. The Consultant shall prepare signalization plans for the modification of the signal at the intersection of Oslo Road and 43rd Avenue. Strain poles will be located for the ultimate 5 lane Oslo Road section. Plans are to be prepared in accordance with the design standards and practices (MUTCD), FDOT Standard Specifications, Indexes, and shall be accurate, legible, complete in design, drawn to scale, and furnished in reproducible form. 6