Laserfiche WebLink
SECTION 01340 <br />SUBMITTAL OF SHOPDRAWINGS <br />1.5 CONTRACTOR'S RESPONSIBILITIES FOR SUBMITTAL OF SHOP <br />DRAWINGS, PRODUCT DATA AND SAMPLES <br />A. The CONTRACTOR's responsibilities for submittal of shop' drawings, <br />product data, and samples are set forth in paragraph 6.17 of the General <br />Conditions and as further explained herein. <br />Prior to submission, thoroughly check shop drawings, product data, and <br />samples for completeness and for compliance with the Contract <br />Documents, verify all dimensions and field conditions, and coordinate the <br />shop drawings with the requirements for other related work. Also review <br />each shop drawing before submitting it to the ENGINEER to determine <br />that it is acceptable in terms of the means, methods, techniques, <br />sequences and operations of construction, safety precautions and <br />programs incidental thereto, all of which are the CONTRACTOR's <br />responsibility. <br />1. It is CONTRACTOR'S responsibility to review submittals made by <br />his suppliers and Subcontractors before transmitting them to <br />ENGINEER to assure proper coordination of the Work and to <br />determine that each submittal is in accordance with its desires and <br />that there is sufficient information about materials and equipment <br />for ENGINEER to determine compliance with the Contract <br />Documents. <br />2. Incomplete or inadequate submittals will be returned for revision <br />without review. <br />C. The CONTRACTOR's responsibility for errors and omissions in submittals <br />is not relieved by the ENGINEER's review of submittals. The <br />CONTRACTOR shall approve the shop drawings based on his in -the -field <br />measurements, prior to submittal to the ENGINEER for his review. <br />D. Notify the ENGINEER, in writing at the time of submission, of deviations in <br />submittals from the requirements of the Contract Documents. The <br />CONTRACTOR's responsibility for deviations in submittals from the . <br />requirements of the Contract Documents is not relieved by the <br />ENGINEER's review of submittals, unless the ENGINEER gives written <br />acceptance of specific deviations. <br />E. Begin no work, which requires submittals until return of submittals with the <br />ENGINEER's stamp andinitials or signature indicating the submittal has <br />been reviewed. <br />01340 - Submittal of Shop Drawings <br />01340-2 <br />F:\Public Works\ENGINEERING DIVISION PROJECTS\1362-Old Dixie Hwy_Highland DM-Admin\Bid Documents Master Contract Documents\01340 <br />- Submittal of Shop Drawings.doc <br />