Laserfiche WebLink
Indian River County Courthouse Renovations <br />100% CD Submittal PGAL Project No. R1002627.00 <br />2.6 METAL EDGE MOLDINGS AND TRIM <br />A. Basis -of -Design Product: Subject to compliance with requirements, provide product <br />indicated on Drawings or comparable product by one of the following: <br />1. Armstrong World Industries, Inc. <br />2. CertainTeed Corp. <br />3. Chicago Metallic Corporation. <br />4. Fry Reglet Corporation. <br />5. Gordon, Inc. <br />6. USG Interiors, Inc.; Subsidiary of USG Corporation. <br />B. Roll -Formed, Sheet -Metal Edge Moldings and Trim: Type and profile indicated or, if <br />not indicated, manufacturer's standard moldings for edges and penetrations that <br />comply with seismic design requirements; formed from sheet metal of same material, <br />finish, and color as that used for exposed flanges of suspension -system runners. <br />1. Provide manufacturer's standard edge moldings that fit acoustical panel edge <br />details and suspension systems indicated and that match width and configuration <br />of exposed runners unless otherwise indicated. <br />2. For circular penetrations of ceiling, provide edge moldings fabricated to diameter <br />required to fit penetration exactly. <br />2.7 ACOUSTICAL SEALANT <br />A. Products: Subject to compliance with requirements, available products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />1.. Acoustical Sealant for Exposed and Concealed Joints: <br />a. Pecora Corporation; AC -20 FTR Acoustical and Insulation Sealant. <br />b. USG Corporation; SHEETROCK Acoustical Sealant. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine substrates, areas, and conditions, including structural framing to which <br />acoustical panel ceilings attach or abut, with Installer present, for compliance with <br />requirements specified in this and other Sections that affect ceiling installation and <br />anchorage and with requirements for installation tolerances and other conditions <br />affecting performance of acoustical panel ceilings. <br />B. Examine acoustical panels before installation. Reject acoustical panels that are wet, <br />moisture damaged, or mold damaged. <br />C. Proceed with installation only after unsatisfactory conditions have been corrected. <br />May 1,2018 <br />095113 Acoustical Panel Ceilings 100% Construction Documents <br />Page 6 of 10 <br />