09/10/2019 (2) - Laserfiche WebLink

Home Browse Search

(2) Powders or Solids .in Solution =10 minutes (3) Liquids -- No value shall be entered (d) Enter the proper natural physical state of the chemical at room temperature in the physical state field, (as specified in CAMEOfm Chemicals). (e) On the Scenario page(s) Scenario Description tab, use the weather default settings or, enter average wind.speed. Alternate scenarios may also be entered. (f) On the Scenario page(s) Scenario Description tab, rate the Risk, Consequences and Overall Riskof a release occurring at the facility on the bottom of the Scenario Page (the Risk Assessment should be based upon the Extremely Hazardous Substance EHS), previous release history, maintenance conditions etc.). (g) After entering the information noted above on the Scenario Description tab and clicking on the Estimate Threat Zone Radius button, CAMEOfm will automatically estimate the extent of the threat zone that may cause. injury or death to human populations following a release. (h) On the Scenario page(s) notes tab, enter an estimate of the total exposed population within the threat zone(s) or link the facility location to a Marplot map where the threat zone population may be estimated based on the most recently available Census data. This image must be available off-line if this alternative method is selected. A map -capture from Marplot may be saved as an alternative method. If using this method upload the map data image to the CAMEOfm Site Plan tab/Facility page and also write on the Notes tab/Scenario page where the Total Exposed Population can be found. Add the file name. (Example: Total Exposed Population: See Marplot map (name of map SERC#TEP) (i) On the Scenario page(s) notes tab, identify each critical facility. by name and maximum expected occupancy within the threat zone(s) (schools, day cares, public safety facilities, hospitals, etc.). If there are no critical facilities within the threat zone(s), that shall be noted. An alternative method is to link the facility location to a Marplot map in which a critical facilities geographic shape filed has been loaded. If using this method upload the map data image to the CAMEOfm Site Plan tab/Facility page and also write on the Notes tab/Scenario page where the Critical Facility information can be found. Add the file name. (Example: Critical Facilities: See Marplot map (name of map SERC#CF). E. Supporting documentation in the form of Site Visit Certification Form, Statement of Determination or dated letter or email to the SERC, LEPC, and local fire department from the facility identifying the reason the EHS is no longer present shall be submitted to the Division with a list of the facilities for which a Hazards Analysis (HA) was not completed. F. On -Site Visits Conduct a detailed on-site visit, within the period of this Agreement, for all the facilities selected for review this grant cycle from Attachment D. Confirm the accuracy and completeness of information in the Hazards Analysis (HA). Upload to the Facility Page Site Plans Tab. 2. Submit a completed Hazards. Analysis Site Visit Certification Form (Attachment L) for each facility visited to the Division (file name must contain at minimum the SERC number, if applicable, and the acronym SV. If SERC number is not available, facility 22