Laserfiche WebLink
1 - Fabricated Type 316 stainless steel deflector plate. <br /> 1 Set of anchor bolts, stainless steel, for torque arm support bracket, deflection plates, and the upper and <br /> lower bearing base plates. <br /> Approximate shipping weight of the unit is 1,600 lbs. <br /> EXCLUSIONS: The following are not included in this offering: <br /> • Unloading, hauling or storage <br /> • Concrete work or installation <br /> • Grouting materials or grouting operation <br /> • FRP panels across trough <br /> • Electrical controls(i.e. starters, disconnect switches, etc.) <br /> • Electrical conduit,wiring, and supports <br /> • Level sensor <br /> • Finish painting <br /> • Lubricating oil or grease(or grease guns) <br /> • Spare parts <br /> • Tools <br /> GROUTING MATERIALS: Lakeside Equipment shall loan to the contractor additional sheave(s) and <br /> belts as required to operate the screw at a reduced speed for grouting the trough with the screw pump drive. <br /> There is a$400 charge for grouting sheaves and belts not returned freight prepaid to Lakeside Equipment. <br /> ERECTION DATA: The contractor will set the anchor bolts in the influent chamber and for the upper <br /> bearing and drive assembly. The screw and bearings must be carefully aligned. We estimate a total of 50 <br /> man-hours for installation of the screw and alignment of the screw and bearings for each pump. This does <br /> not include the time and manpower required for grouting in the screw pump troughs <br /> SHOP PAINTING: Stainless steel parts will not be shop painted. Motor and reducer will receive a shop <br /> coat of machinery enamel. <br /> SHOP DRAWINGS: We will furnish one (1) electronic copy of drawings for the equipment without <br /> charge. The reviewed drawings are to be returned to us with the notations or approval stamp of the Engineer. <br /> Drawings will require 4 to 6 weeks after receipt of an order and complete information, including plans and <br /> specifications, field dimensions or verification of field dimensions, which are to be provided at no cost to <br /> Lakeside. <br /> SHIPMENT: Shipment can be made in 12 to 16 weeks after receipt of approved drawings by our home <br /> office. <br /> INSTRUCTION BOOKS: One (1) electronic copy of the installation, operation, lubrication and <br /> maintenance book will be furnished before shipment of the equipment. <br /> SERVICE: Inspection of the installed equipment can be made following notice by you that you are ready <br /> for such service. The cost of two (2) days of service in one (1) trip is included in our proposal price. <br /> 36 <br />