Laserfiche WebLink
Section 02731 <br />Irrigation Water Well <br />1.4 Bidders responsibility <br />A. Bidders submitting a proposal are responsible for inspecting the site to acquaint <br />themselves with nature of conditions that will be encountered during construction. This <br />includes awareness of all existing and/or proposed utilities in area of work <br />1.5 Submittals <br />A. Samples, Records and Reports: The Contractor shall take samples of the sub -strata <br />formation at ten -foot intervals and at changes in formation throughout the entire depth <br />of the well. <br />B. Provide Architect/Owner the following information: <br />1. 1 Prior to beginning the drilling of the well, the Contractor shall submit in writing to <br />the Architect the well driller's recommendations for the drilling of. the well based <br />upon the well driller's knowledge of the area. The recommendations shall include <br />the anticipated depth of the casing and the well, and address any concerns that <br />the Contractor may have concerning the water quality or availability. The <br />Contractor shall not proceed with the well installation until the Architect has <br />received and approved the preliminary report from the well driller. <br />2. After the well installation, but prior to installation of the pump system, the well <br />driller shall perform and report on pumping tests as specified in this section. <br />3. The well driller shall report on the static water level. <br />4. The well driller shall estimate the maximum safe yield of the well and the <br />anticipated drawdown at maximum safe yield. <br />5. The well driller should provide the results of the required Non -Filterable Residue <br />tests from an approved testing laboratory. Two test samples are required. One <br />test sample should be taken at the beginning of the pump test, and one test <br />sample taken at the end of the pump test. <br />6. The well driller shall provide an information log indicating strata encountered for <br />the well. <br />7. The well driller shall provide a certification that each well is aligned and plumb, <br />within the specified tolerances. <br />C. Provide the Architect/Owner physical and chemical analysis of water from the finished <br />well. Make the analysis, certified by an approved testing laboratory, in accordance with <br />local authority requirements, including the following: <br />1. Test and report results for the iron and salt content of the water from the well. <br />Two test samples are required. One test sample should be taken at the beginning <br />of the pump test, and one test sample taken at the end of the pump test. <br />2. Test and report results for any other analysis necessary in order to conform with <br />the requirements or regulations of the Florida DER or other government body <br />having jurisdiction. <br />1.6 Quality assurance <br />A. Perform Work in accordance with AWWA A100. <br />B. Drilling Firm: Company specializing in performing the work of this section with minimum <br />five years documented experience. <br />C. Submit proof of state license to perform this work. <br />State Road 60 and 431 Avenue <br />