Laserfiche WebLink
Metadata
Document management portal powered by Laserfiche WebLink 9 © 1998-2015 Laserfiche. All rights reserved.
IRC-1838 Indian River County <br />Main Library <br />Roof Replacement 01 11 00-2 Summary of Work <br />1.03 RELATED SECTIONS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Specification Sections, apply to this Section. <br />1.04 SITE INVESTIGATION <br />A. The Contractor acknowledges that he has satisfied himself as to the nature and location of <br />the Work, the general and local conditions, particularly those bearing upon transportation, <br />disposal, handling and storage of materials, availability of labor, water, electric power, <br />roads and uncertainties of weather, ground water table or similar physical conditions at the <br />site, the conformation and condition of the ground, the character, quality and quantity of <br />surface and subsurface materials to be encountered, the character of equipment and <br />facilities needed prior to and during the prosecution of the Work and all other matters which <br />can in any way affect the Work or the cost thereof under this Contract. Any failure by the <br />Contractor to acquaint himself with all the available information concerning these <br />conditions will not relieve him from responsibility for estimating properly the difficulty or cost <br />of successfully performing the Work. Field measurements shall be taken at the site by the <br />Contractor to verify all data and conditions affected by the Work. <br />1.05 SPECIFICATION FORMATS AND CONVENTIONS <br />A. Specification Format: The Specifications are organized into Divisions and Sections using <br />the 49-division format and CSI/CSC's "MasterFormat" numbering system. <br />1. Section Identification: The Specifications use section numbers and titles to cross- <br />reference Contract Documents. Sections in the Project Manual are in numeric <br />sequence.; however, the sequence is incomplete. Consult the Table of Contents <br />at the beginning of the Project Manual. <br />B. Specification Content: The Specifications use certain conventions for the style of language <br />and the intended meaning of certain terms, words, and phrases when used in particular <br />situations. These conventions are as follows: <br />1. Abbreviated Language: Language used in the Specifications and other Contract <br />Documents is abbreviated. Words and meanings shall be interpreted as <br />appropriate. Words implied, but not stated, shall be inferred as the sense requires. <br />Singular words shall be interpreted as plural, and plural words shall be interpreted <br />as singular where applicable as the context of the Contract Documents indicates. <br />2. Imperative mood and streamlined language are generally used in the <br />Specifications. Requirements expressed in the imperative mood are to be <br />performed by Contractor. Occasionally, the indicative or subjunctive mood may <br />be used in the Section Text for clarity to describe responsibilities that must be <br />fulfilled indirectly by Contractor or by others when so noted. <br />a. The words "shall," "shall be," or "shall comply with," depending on the <br />context, are implied where a colon (:) is used within a sentence or phrase. <br />PART 2 PRODUCTS (NOT USED) <br />PART 3 EXECUTION (NOT USED) <br />END OF SECTION 01 11 00