Laserfiche WebLink
IRC-1838 Indian River County <br />Main Library <br />Roof Replacement 07 62 00-1 Sheet Metal Flashing and Trim <br />SECTION 07 62 00 <br />SHEET METAL FLASHING AND TRIM <br /> GENERAL <br />1.1 SECTION INCLUDES <br />A. Fabrication and installation of new sheet metal flashings and trim to provide a permanently <br />watertight condition. <br />1.2 RELATED SECTIONS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Specification Sections, apply to this Section, including but not limited to: <br />1. Rough Carpentry Section 06 10 00 <br />2. Modified Bitumen Roofing Section 07 52 16 <br />3. Manufactured Gravel Stops and Fascias Section 07 71 19 <br />1.3 REFERENCES <br />A. Refer to the following references for specification compliance: <br />1. 2017 Florida Building Code <br />2. ASTM International <br />3. National Roofing Contractors Association (NRCA) <br />4. Sheet Metal and Air Conditioning Contractors National Association (SMACNA) <br />a. Architectural Sheet Metal Manual, Seventh Edition – January 2012 <br />5. ANSI/SPRI ES-1 <br />1.4 SUBMITTALS <br />A. Refer to Section 01 33 00-Submittal Procedures. <br />B. Manufacturer’s Product Data Sheets for all materials specified certifying material complies <br />with all specified requirements. <br />C. Pre-finished sheet metal and sealant color chart. <br />D. Shop Drawings for any transitions and/or terminations not depicted in Contract Drawings. <br />1.5 QUALITY ASSURANCE <br />A. Installation shall comply with the Contract Drawings. References to figures are from <br />SMACNA Architectural Sheet Metal Manual, Seventh Edition – January 2012. <br />B. Ensure work is free of leaks in all weather conditions. <br />C. Fabricate metal edge and coping in accordance with ANSI/SPRI ES-1 requirements. <br />D. Workmanship shall be first-class in every respect. The sheet metal work shall be <br />assembled and secured in accordance with these specifications, the manufacturer’s <br />requirements and referenced standards. <br />1.6 DELIVERY, STORAGE AND HANDLING