2020-211 - Laserfiche WebLink

Home Browse Search

Indian River County, Amendment No. 8 66th Avenue/ Phase 1B 4911 to 6911 Roadway Widening 2. Plan sheets shall depict existing right-of-way, section lines, property lines, temporary construction easements, and centerline of construction. Horizontal control points with state plane coordinates for all PC's, PT's, curve radius, curve length and horizontal Pi's shall be included on the Plan or summarized in an alignment table. 3. Signing and Pavement Markings will be included within the Construction Documents. All signing and pavement markings are to be prepared in accordance with the latest design standards and practices (MUTCD), FDOT Standard Specifications, Indexes, and COUNTY standards. 4. Plans shall include spot grades adequate to describe any proposed grading. 5. Match lines shall not be located within the limits of an intersection. 6. If applicable, soil boring information shall be plotted on cross sections with soil classification and high season water table. 7. All quantities shall reference FDOT Pay Item Numbers. 8. All details shall reference FDOT Index Numbers, where applicable. 9. All specifications shall reference the FDOT Specifications for Road and Bridge Construction. Any deviations or special specifications not included in FDOT Specifications will be provided in the Technical Specifications. 10. Initial (40% completion), interim (80% completion) and Final Plan (100% completion) Submittal shall include the following: i. Three (3) Sets Plans. ii. One (1) Opinion of Probable Construction Cost iii. One (1) CD with drawings in PDF format. The Consultant will be responsible for producing an opinion of probable cost (OPC) estimate and reviewing and updating the OPC when scope changes occur and/or at designated milestones of the project. A Summary of Pay Items sheet shall be prepared with all required Initial (40%), Interim (80%) and Final Plan (100%) submittals. The Final Plans will be provided signed and sealed. The plans will be prepared based upon English units. The design will be conducted in MicroStation and Geopak. The Final Plans will be provided in Autodesk Civil 3D format. C. Signing and Pavement Marking Plans: Signing and Pavement Marking plans shall include: Preparation of the plan layout, key map, quantities (including signing and pavement marking quantity), tabulation of quantities, and detail of major signs. Plans are to be prepared in accordance with the latest design standards and practices (MUTCD), FDOT Standard Specifications, Indexes, and shall be accurate, legible, complete in design and drawn at the same scale as the Roadway Plans, furnished in reproducible form.