Laserfiche WebLink
Risk Severity <br /> A. B CDE <br /> U <br /> o C <br /> czt N O • <br /> E <br /> Risk Probability U z <br /> 5 Frequent 5A 5B 5C 5D 5E <br /> 4 Occasional 4A 4B 4C 4D 4E <br /> 3 Remote 13A 3B 3C 3D 3E <br /> 2 Improbable 2A 2B 2C 2D 2E <br /> 1 Extremely 11 1B 1C 1D 1E <br /> Improbable <br /> tilt , I; 1,1k <br /> High Unacceptable Correction required <br /> Serious Undesirable Correction may be required, decision by <br /> management <br /> Medium Acceptable W/review With review and documentation by management <br /> Low Acceptable Without review <br /> ( II1o,6t41,1'2 Acceptable No Action needed <br /> 4) Hazard Resolution and Elimination <br /> Hazard resolution is defined as the analysis and subsequent actions taken to reduce the hazard to <br /> the lowest level practical and the risk associated with an identified hazard. Hazard resolution is <br /> not synonymous with hazard elimination. In a transit environment,there are some hazards, which <br /> are impossible to eliminate and others,which are highly impractical to eliminate.Reduction of <br /> risk to the lowest practical level can be accomplished in a variety of ways from protective and <br /> warning devices to special procedures. <br /> 1. Design out or design to minimize hazard severity. To the extent permitted by cost and <br /> practicality, identified hazards will be eliminated or controlled by the design of <br /> equipment, systems and facilities. <br /> 2. Hazards that cannot reasonably be eliminated or controlled through design will be <br /> controlled to the extent practicable to an acceptable level through the use of fixed, <br /> automatic, or other protective safety design features or devices. <br /> 3. When design and safety devices cannot reasonably nor effective, eliminate or control <br /> an identified hazard, safety warning devices will be used(to the extent practicable)to <br /> alert persons to the hazards. <br /> 4. Where it is impossible to reasonably eliminate or adequately control a hazard through <br /> design of the use of safety warning devices,procedures and training will be used to <br /> control the hazard. <br /> 101 <br />