My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
08/18/2020
CBCC
>
Meetings
>
2020's
>
2020
>
08/18/2020
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/10/2020 4:37:55 PM
Creation date
10/19/2020 4:12:21 PM
Metadata
Fields
Template:
Meetings
Meeting Type
BCC Regular Meeting
Document Type
Agenda Packet
Meeting Date
08/18/2020
Meeting Body
Board of County Commissioners
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
878
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
ii. Except in locations within 3 1/2 inches of the bus floor, all readily accessible <br /> exposed edges or other hazardous protrusions of parts of wheelchair lift <br /> assemblies or ramps that are located in the passenger compartment shall be <br /> padded with energy absorbing material to mitigate injury in normal use and in <br /> case of a collision. This requirement shall also apply to parts of the bus <br /> associated with the operation of the lift or ramp. <br /> iii. The controls for operating the lift shall be at a location where the bus driver or <br /> lift attendant has a full view, unobstructed by passengers, of the lift platform, <br /> its entrance and exit, and the wheelchair passenger, either directly or with <br /> partial assistance of mirrors.Lifts located entirely to the rear of the driver's seat <br /> shall not be operable from the driver's seat, but shall have an override control <br /> at the driver's position that can be activated to prevent the lift from being <br /> operated by the other controls (except for emergency manual operation upon <br /> power failure). <br /> iv. The installation of the wheelchair lift or ramp and its controls and the method <br /> of attachment in the bus body or chassis shall not diminish the structural <br /> integrity of the bus nor cause a hazardous imbalance of the bus.No part of the <br /> assembly, when installed and stowed, shall extend laterally beyond the normal <br /> side contour of the bus or vertically beyond the lowest part of the rim of the <br /> wheel closest to the lift. <br /> v. Each wheelchair lift or ramp assembly shall be legibly and permanently marked <br /> by the manufacturer or installer with the following information: <br /> 1. The manufacturer's name and address. <br /> 2. The month and year of manufacture. <br /> 3. A certificate that the wheelchair lift or ramp securement devices,and their <br /> installation, conform to State of Florida requirements applicable to <br /> accessible buses. <br /> o Wheelchairs. Wheelchair lifts, ramps, securement devices, and restraints shall be <br /> inspected and maintained as required by this rule chapter. Instructions for normal <br /> and emergency operation of the lift or ramp shall be carried or displayed in every <br /> bus. <br /> 145 <br />
The URL can be used to link to this page
Your browser does not support the video tag.