05/11/2021 - Laserfiche WebLink

Home Browse Search

PLEXI—CHEMIE INC. Product Data Sheet For: PLEXICOAT F NOVOLAC Description: PlexiCoat F is a 100% solids, chemical resistant novolac epoxy, clear or pigmented, used to coat or line concrete, masonry, or other polymeric surfaces where high chemical and thermal protection is required. PlexiCoat F is designed for service in harsh chemical environments. PlexiCoat F is used to upgrade the chemical and heat resistance of PlexiOuarh_ and PlexiChip floors, as a binder in troweled surfacers and other applications. PlexiCoat F provides excellent chemical resistance for primary and secondary containment and will provide exceptional service near high temperature processes areas. Certain exposures will require PlexiCrete (urethane mortar) and PlexiCoat P (hi -functioning hybrid resin). PlexiCoat F is available in clear, pigmented regular and fast cure and flake. Features and Benefits: PlexiCoat F has excellent chemical resistance to organic and inorganic chemicals. Positive cure in cool and damp conditions. �^ 100% non-volatile & odorless for applications in occupied facilities. Materials comply with USDA requirements for use in federally inspected Meat and Poultry Plants. fi^ PlexiCoat F is an excellent coating for concrete, steel, aluminum and wood surfaces. It is formulated to provide better chemical resistance to dilute acids, caustics and solvents than conventional epoxy systems. PlexiCoat F can be used as a coating system where high chemical resistance is required. PlexiCoat F can be used with a quartz or chip broadcast system. PlexiCoat F can be used as a mortar binder for very heavy duty and chemical resistant flooring. Typical Applications: �^ Cafeterias, restaurants and hospital rooms Pharmaceutical facilities Food plants of all types r- Beverage and processing plants Institutional kitchens Battery storage areas ^ Hangar floors Animal care facilities �^ Labs- floors and walls Secondary containments 606-6 Lane Avenue North Jacksonville, FL 32254 Phone (904) 693-8800 FAX (904) 693-8700 www.plexi-ch emie.com Limitations: Do not apply in temperatures less than 40°F or greater than 95°F. Material cures slower at cooler temperatures and working time will be reduced at higher temperatures. Both components should be stored at ambient temperatures between 65'F and 80°F. Do not apply to slabs on grade unless vapor mitigation issues have been addressed. Surface Preparation: Surface must be prepared to remove all sealers, curing compounds, oils, greases and other contaminants and laitance. As a standard rule, stand mix concrete should be cured a minimum of 28 days. Cure Schedule (7a. 75°F: Pot Life* 35 minutes Tack free* 6 hours Foot traffic* 12 hours Forklift traffic* 24 hours Full chemical exposure 7 days *Low temp products will cure approximately 40% faster than standard cure. Service Temperature (Mortar Systems): 200°F (immersion) 350°F (dry heat) Packaging: 2 to 1 ratio Packaged in 3 and 15 gallons units. A & B mixed viscosity is 800 cps. Coverage: Determined by type of service but a generally PlexiCoat F should be applied at a minimum of coats as a coating, at a minimum of 10 mils per coat (160 sq. ft. /gal. minimum). PlexiCoat F Novolac can be used as a binder for 1/8" inch shop floors, or %d' inch troweled epoxy mortars. Installation: 1. As a coating system: Premix parts A&B separately prior mixing A&B together for approximately 2 minutes. Always mix by mechanical means. Always mix mechanically until a uniform blend is obtained. 2. Asa binder -for P1exiOuartz: Follow standard color quartz application techniques. 3. PlexiClad troweled mortar. See P1exiClad data sheet. PLEXICOAT F NOVOLAC DATA SHEET I I15Qe