Laserfiche WebLink
Florida Building Code, Residential Section R322 and these floodplain <br />regulations.that <br />Anchoring. All new manufactured homes and replacement manufactured homes <br />shall be installed using methods and practices towhir-h minimize flood damage, <br />Manufactured homesaf4 shall be securely anchored to an adequately anchored <br />foundation system to resist flotation, collapse or lateral movement. Methods of <br />anchoring include, but are not limited to, use of over -the -top or frame ties toground <br />anchors. This anchoring requirement is in addition to applicable state and local <br />anchoring requirements for wind resistance. <br />4. Elevation. Manufactured homes that are placed, replaced, or substantially improved <br />that are located in a flood hazard area, coastal high -hazard areas and Coastal A <br />Zones shall be elevated such that the bottom of the frame is at or above the base <br />flood elevation plus one (1) foot. viith seetien g39.97(:24P) Ar <br />•­101mr- ME <br />11 <br />NM <br />a Rottom of the frame of the mane fart red home i at or above the elevation <br />Residential Seot'on RK22 2 /-Zone 4\ er Seot' 8322 4 (Z V/ <br />....,...., � .,.... ..... cion i � o c � . c�vi�c-��vrvcvcre'n--r'cvzz��cvrrc-vTvr <br />b. Bettem of the frame is aneFted by re'nfpiersr other fe- incl +'on <br />elemeRtc of at least equivalent strength that are net less than thirty civ (36) <br />inghec in height above grape <br />5.7- Enclosures. FU lly enGles Enclosed areas below elevated manufactured homes <br />shall comply with the requirements of the Florida Building Code, Residential Section <br />R322 for such enclosed areas, as applicable to the flood hazard area. <br />