02/15/2022 (4) - Laserfiche WebLink

Home Browse Search

2. Type of vegetation irrigated i.e.. turf shrubs native plants, etc. 3. Type of Sprinkler i.e.. Sprinklers with the proper Matched Precipitation Rate. 4. Soil characteristics Soil Absorption Rate, and slope. 5. Sun and shade exposure. iv. Design Sprinkler irrigation systems should be designed with the appropriate uniformity for the type of plants being grown and the type of soil found in that area The general watering of different types of plants as one group without regard to their individual water requirements is to be avoided. 1. In inspecting the sprinker irrigation system design. the system shall comport with the Low Quarted Distribution Uniformity Test. 2. Sprinkler Heads shall operate within 20% of the optimum operatinn ressure but not more than the maximum or less than the minimum guidelines as Eecified by the manufacturer. v. _Florida Building Code The irrigation system shall comply with the most recent version of the Florida Building Code Plumbing Appendix F (or the applicable Florida Building Code provisions at the time of the application , including but not limited to Appendix F's requirements for Sprinkler/emitting spacing and selection pipelines and control valves. vi. Record drawing. The applicant shall submit a record drawing of the irrigation system and shall contain the following information: 1. Location, type. pressure. and maximum flow available of all water sources. 2. Location type and size of all c:)mponents including but not limited to backflow devices controllers flow meters the Lateral Pipelines, the Mainline micro irrigation moisture sensors pumps, pump start relays rain sensors Sprinklers valves water source wells, or an other irrigation components. 3. The Flow Rate application rate (inches per hour) and the operating pressure for the Sprinklers and micro irrigation (within each zone as apnlicablel Added language is underlined; deleted language is sirue1MJ� 196