2023-053B - Laserfiche WebLink

Home Browse Search

HEARTLAND WATER TECHNC3L0—. . www. hea rtla ndtech.com 6. Once truck is aligned with the Roll -Off box, the Contractor can begin the process of picking up the Roll -Off. 7. Contractor will be responsible for securing Roll -Offs for transport. 8. Contractor will transport Roll -Off to Landfill and dispose of residuals contained in the Roll- off. 9. Contractor's Truck Driver will return to Evaporation Plant and Contractor's Truck Driver will place the empty Roll -Off on its designated stand. 10. Performance by Contractor of Procedures 5-9 and 12 must at all times be observed by IRSC Personnel. 11. Contractor will complete a walk -around inspection prior to job completion and verbally notify IRSC of any issues, damage etc. to the boxes or stands followed up by a written notification within 24 -hours; IRSC will have the right to observe this process and inspect on its own. 12. At least once monthly or more frequently if requested by IRSC, after the Roll -Offs have been emptied at the landfill by Contractor but before they have been placed back on their stands at the Evaporation Plant, IRSC will inspect the Roll -Offs to determine if they need to be washed .out as a preventative maintenance measure. If such washout is required, IRSC will inform Contractor and coordinate Contractor bringing the emptied Roll -Offs to the County's Wash Bay Facility where IRSC will clean them. If Roll -Offs need to be removed from the truck for cleaning, Contractor will be responsible for safely unloading the dirty Roll -Off for cleaning and reloading them back on the truck once IRSC completes the cleaning. [Procedure for this to be developed by the parties if necessary and added to this SOP]. Once the washout is completed, Contractor will be responsible for transporting the washed Roll -Offs back to the Evaporation Plant and replacing them at their designated location on the stands at the Evaporation Plant in accordance with this SOP. DISCLAIMER: This Standard Operating Procedure (SOP) was developed based on a compilation by IRSC of best available information, knowledge, field experience, and general IRSC practices to provide guidance to Contractor as it completes the work required to manage residual coming from the IRSC Evaporation Plant. In performing the activities defined herein, Contractor will work in a consistent and standardized manner. This document does not contain regulatory or statutory requirements unless specified. IRSC has made every attempt to present the information in a clear and concise manner for users with basic mechanical understanding. However, IRSC is not responsible for the misuse or misinterpretation of the information presented herein. Under no circumstances shall IRSC be liable for any actions taken or omissions made by non-IRSC users of this document Hazards have been identified but site conditions can change, and other hazards may occur. Residual Removal Page 2 of 2 SOP IRC -7004