Laserfiche WebLink
C-1 <br />C> <br />1.09 <br />C. Submittals shall contain: <br />1. The date of submission and the dates of any <br />previous submissions <br />2. The project title and number <br />3. Contract identification <br />4. The name of: <br />a. Contractor <br />b. Supplier <br />C. Manufacturer <br />5. Identification of the project, with <br />specification section number <br />6. Field dimensions, clearly identified as such <br />7. Relation to adjacent or critical features of <br />the Work or materials <br />B. Applicable standards, such as ASTM or Federal <br />Specification numbers <br />g. Identification of deviations from Contract <br />Documents <br />10. Identification of revisions on resubmittals. <br />11. An 8" x 3" blank space for contractor and <br />Engineer stamps <br />12. contractor's stamp or review and approval, <br />initialed or signed, certifying to review of <br />submittal, verification of products, field <br />measurements and field construction criteria, <br />and coordination of the information within the <br />submittal with requirements of the work and of <br />Contract Documents <br />RESUBMISSION REQUIREMENTS <br />A. Make any corrections or changes in the submittals <br />required by the Engineer and resubmit until <br />approved. <br />B. Shop Drawings and Product Data: <br />1: Revise initial, drawings or data, and resubmit <br />as specified for initial submittal. <br />2. Indicate any changes which have been made <br />other than those requested by the Engineer. <br />C. Samples: Submit new samples as required for <br />initial submittal. <br />01340--4 <br />