Laserfiche WebLink
C-1 <br />i <br />4.9 Supervisor Console <br />4.9.1 Priority Override (Pre-empt) <br />Setup <br />This test only applies to consoles that have been programmed as <br />Supervisors. This test also requires the use of a console that is not <br />programmed as a supervisor, and a test radio. <br />Execution <br />1 Place (and hold) a call at the non -supervisor console on the test group. <br />Verify this call is received by the test radio. <br />2. At the supervisor console, transmit on the same test group. <br />3. Verify that the audio heard on the radio is the audio from the <br />supervisor's console and not the audio from the non -supervisor's <br />console. <br />4. tlnkey both consoles. <br />4.9.2 Console Enable/Disable <br />Setup <br />This test only applies to consoles that have been programmed as <br />Supervisors. This test also requires the use of a console that is not <br />programmed as a supervisor, and a test radio. <br />Execution <br />1. From the supervisor console perform a console disable function on the <br />non -supervisor console. <br />2. Verify that the non -supervisor console indicates disabled. Attempt to <br />transmit, and verify the console is unable to transmit to the test radio. <br />3. Re -enable the non -supervisor console from the supervisor console. <br />4. Verify that the non -supervisor console becomes functional again by <br />transmitting to the test radio. <br />