|
7.7.7 Patch Cords and Pigtails
<br />Utilize factory pre -terminated assemblies that adhere to the applicable cable, cordage and fiber
<br />specifications stated within this Technical Special Provision. All pigtails shall have a 3mm outer
<br />jacket unless otherwise noted. All pigtails shall use the same glass manufacturer and core
<br />diameter as the fiber it is being fusion spliced to. All IP assemblies shall meet NEC jacketing
<br />requirements for this project's application and shall have outer jacket coloration of yellow and
<br />aqua for multi -mode. The connector shall accommodate the fiber type and size associated with
<br />this project.
<br />No splices of any type are allowed within an assembly. Each assembly shall be individually
<br />packaged within a plastic bag, with the submitted manufacturer's part number marked clearly
<br />on the outside. Each assembly shall be labeled as directed by the Owner.
<br />Optical Termination Losses:
<br />Connector Type
<br />Installation
<br />Max. Loss
<br />Return Loss
<br />ST/SC/LC Single Mode
<br />Field
<br />0.30dB
<br />>.40dB
<br />ST/SC/LC Single Mode
<br />Factory
<br />0.25dB
<br />>.45dB
<br />7.7.8 List of Items for Optical Splicing and Termination
<br />The items and services listed below are not an all-inclusive list. Furnish, install, splice, and test
<br />all fiber optic cable, fiber optic assemblies, patch cords, and all passive network infrastructures
<br />including, but not limited to, splice trays and closures, patch panels, fan—outs, terminations, and
<br />fusion splices. The fiber-optic cables listed below must conform to the specifications in Section
<br />7.5.2.
<br />a) 12 fiber, SM/MM, termination
<br />b) 24 fiber, SM/MM, termination
<br />c) 48 fiber, SM/MM, termination
<br />d) 72 fiber, SM/MM, termination
<br />e) 96 fiber, SM/MM, termination
<br />f) 144 fiber SM/MM, termination
<br />g) 12 fiber, SM/MM, splice
<br />h) 24 fiber, SM/MM, splice
<br />i) 48 fiber, SM/MM, splice
<br />j) 72 fiber, SM, splice
<br />k) 96 fiber, SM, splice
<br />1) 144 fiber, SM, splice
<br />m) 06 fiber, SM, buffer fan -out kit
<br />n) 12 fiber, SM, buffer fan -out kit
<br />o) FO Connector — ST type, MM, Unicam connector
<br />p) FO Connector — ST type, SM, Unicam connector
<br />q) FO Closure — re-entry kit, cable preparation, up to 144 fiber, aerial or underground
<br />installation
<br />r) FO Splice — OTDR test any wavelength, one direction, bare fiber
<br />s) FO Closure — splice tray, fusion heat shrink, 12 fiber, 12" size
<br />t) FO Closure — splice tray, fusion heat shrink, 24 fiber, 12" size
<br />u) FO Splice —fusion splice, heat shrink <0.04 Db, OSP including detail as needed
<br />v) OSP Aerial — messenger table, 1/4", per foot
<br />w) OSP Aerial — remove messenger cable, 1/4", per foot
<br />34
<br />
|