Laserfiche WebLink
comply with specification or plan requirements; such <br />tests or inspections shall be reimbursed to the <br />f; <br />i <br />Owner by the Contractor. <br />E. Reimbursements to the Owner for costs of tests and <br />inspections shall be by Deductive Change orders from <br />I the Contract Sum. <br />1.04 DEFECTIVE MATERIALS - The Engineer reserves the <br />right to demand for test or special examination any <br />material or part thereof to insure compliance with <br />the specifications and he may reject any material or <br />part judged defective as a result of such tests and <br />the Contractor shall replace such defective material <br />or part with material or part that does comply with <br />the specifications at no additional expense to the <br />Owner. <br />1.05 REPORTS - Test and inspection reports shall be <br />written immediately upon conclusion of each <br />procedure; copies shall be provided to the <br />following: <br />4 <br />Owner <br />Architect <br />Engineer <br />Contractor <br />Building Department <br />f 1.06 TEST CRITERIA - The specific test and inspection <br />procedures and their required results are enumerated <br />herein by reference to recognized standards and <br />shall be the required method for testing and judging <br />4 the results unless deviations from the standards are <br />specifically mentioned. <br />I 1.07 STANDARDS - Applicable Standards listed in theseR- Specifications include, but are not necessarily <br />limited to, standards promulgated by the following <br />agencies and organizations: <br />1. AASHTO = American Association of State Highway <br />and Transportation officials, 341 National Press <br />Building. Washington, D.C. 20004, <br />r 2. ACI = American Concrete Institute, Box 19150, <br />Redford, Station, Detroit, Michigan 48219. <br />3. RISC = American Institute of Steel Construction, <br />i Inc. 1221 Avenue of the Americas, New York, N.Y. <br />10020. <br />4. ANSI = American National Standards Institute <br />successor USASI and ASA) 1430 Broadway, New <br />York, N.Y. 10018. <br />01400-2