Laserfiche WebLink
40 <br />u <br />SECTION 10800 --TOILET ACCESSORIES <br />PART 1 - GENERAL <br />1.01 RELATED DOCUMENTS <br />Drawings and general provisions of Contract, including <br />General and Supplementary Conditions and Division -1 <br />Specification sections, apply to work of this Section. <br />1.02 DESCRIPTI0N OF WORK <br />A. Extent and location of each types of toilet accessory <br />is shown on drawings. <br />B. Tyres of toilet accessories required include the <br />following: <br />Paper towel dispensers and waste receptacles. <br />Toilet tissue dispensers <br />Grab bars <br />Soap dispensers <br />Mirrors <br />C. Some type of toilet accessories are included as part <br />of toilet partitions elsewhere in Division 10. <br />1.03 QUALITY ASSURANCE <br />A. Inserts and Pinchorages: Furnish inserts and anchoring <br />devices which must be set in concrete or built into <br />masonry; coordinate delivery with other work to avoid <br />delay. <br />n, Ac<:essory Locations: 400rdinate accessory locations <br />with other work to avoid interference and to assure_ <br />proper operation and servicing of accessory units. <br />C. Manufacturer: Provide each type of toilet accessory <br />required as manufactured by one of the following: <br />American Specialties Inc. <br />Bradley corporation <br />Hallmark - Nutone <br />Parker Scovill <br />Watrous, Inc. <br />Bobrick Washroom Equipment, Inc. <br />Franklin Brass <br />1.04 SUBMITTALS <br />A. Product Data. Submit manufacturer's technical data <br />and installation instructions for each toilet <br />accessory. <br />B. Setting Pjawinus: Provide setting drawings, <br />templates, instructions, and directions for <br />installation of anchorage devices and cut out <br />requirements in other work. <br />10800-1 <br />