2000-046 - Laserfiche WebLink

Home Browse Search

4b • M SECTION 2H - UTILITY CONDUITS r 1. DESCRIPTION i A. Work under this heading consists of furnishing and installing conduits tinder the roads at the locations shown on the Plans. 2. INSTALLATION t A. The conduit shall be installed prior to the construction of the paving subgrade. The conduit shall, unless otherwise noted, be PVC, SCH 40 pipe. Unless otherwise noted, the conduit shall be 4 inch diameter and be t installed with 42 inches cover at the centerline of the road. All conduit V shall extend a minimum of four feet beyond the edge of the pavcattent or, if there is a curb, the back of the curb. I B. The pipe shall be installed straight, level and in strict accordance with the manufacturers recommendations. Backfill shall be compacted in uniform layers to a minimum of WOIXe of maximum dry density per AASHTO T -I8@. 3. LOCATION MARKING A. The Contractor shall accurately mark the location and depth of the ends of the conduits by a method which will allow the utility company to readily locate the ends. The Contractor shall also deliver to the l nginecr an "AS BUILT" drawing showing the location of the conduits i with reference to man holes, street intersections, lot corners or other permanent references. 1. AS-13UILT5 A. During the installation of utility conduits the Contractor shall keep accurate records of the As -Built construction showing the location and burial depths of ;all utility conduits. All conduits shall be referenced t frorn permanent objects such as manholes, valves, etc, Upon completion of the project the Contractor shall deliver to the Engineer an As - Built 'hawing showing the above infortnaluxn. 5. PAYMENT A. Payment for this item shall be on a lineal toot basis Ian• each diameter specified and shall include the cost of all labor, tools, materials, compaction, and equipment necessary to complete the work in accordance with the Plans and Specifications. t