2000-046 - Laserfiche WebLink

Home Browse Search

C-1 db r t t Wabasso Causeway Park Improvements 5ECTIt}N SA - HARDWAREAND P CIALTIES: ' 1. The Contractor shall furnish all materials, labor, and equipment necessary for Ate installation of all the hardware and specialties. I2. The Contractor shall examine all work in direct contact with or having an effect on all hardware and specialty items. If any defects are found that would have an 4 adverse effect on his work, the Contractor shall notify the owner in writing. If the Contractor proceeds with his work without effecting this notification, it shall be construed as an acceptance by hint of all proceeding, work. 3. Description: The hardware headings are intended to cover all the doors of the building and establish a standard of quality and application. It is the specific duty of the hardware supplier to examine the plans and specifications and advise the owner t of any omissions or discrepancies. Authorization for change shall be by addendum i only. The omission of an item from this section does not relieve the Contractor from providing hardware for all parts of the building where such items would normally be required in order to properly complete the work. A. Proposal is to cover the installation and furnishing of finish hardware as detailed. Proposal must read "in accordance with plans and specifications ", and is not to he qualified in any manner. E. It is the responsibility of the hardware supplier to furnish hardware that conforms to all code requirements. I 4. All hardware shall be new and free from defects. Products are to be those specified. Any requests for substitutions will require owners approval. 5. Packing, Marking, Delivery A. Items of hardware shall be packaged separately, labeled with cormsponding symbols to that on the hardware schedule to identify hardware location within building. Each container or package shall include necessary fastenings, instructions, and installation templates to facilitate installation. I All hardware shall be delivered, transportation charges prepaid, to the job site t or to the door manufacturer. r 6. Keying: Furnish two (2) change keys with each lock set. All keys :;hall remain in l the possession of the Contractor under maximum security until Project completion. The Contractor will labelthe key at the time of instal lation.Keys will be turned over to the Owner at Project completion.All doors to be keyed alike. I'r,ii f .� PRODUCUS: See drawings and I htrdware Schedule liela�w. I PART 3 - EXECUTION 1. INSTALLATION: A. Install and adjust for proper Operation and function. Cover door knobs and other surfaces while all finish work is in progress. Clean paint from exposed surfaces thoroughly hefnre buildiiig is occupiicd. E NA - I Allflf NDUM NO. 7 "