2024-161 - Laserfiche WebLink

Home Browse Search

Indian River County Solid Waste Disposal District Solid Waste and Recyclables Franchise Agreement 54 • The lid must be hinged to open to a position of 270 degrees from the closed position and hang open without stressing the lid, body, or tipping over the Roll Cart. • Lids must be designed to be easily removed in the event of damage or failure. Lid latches are not acceptable. Handle . Each Roll Cart must have a horizontal handle(s) to provide comfortable gripping areas for pushing or pulling the Roll Cart. • The handle must be integrally molded into the body or lid, and only plastic surfaces shall be exposed to the hands of the user. Wheels/Axle 0 Roll Carts must be equipped with two (2) plastic molded or rubber wheels making the cart capable of being easily moved and maneuvered. • Wheels shall be snap -on or attached in a way that prevents unintended detachment. • Wheels must be a minimum of 10 inches in diameter for large and medium Roll Carts and a minimum of 8 inches in diameter for small Roll Carts. • Each Roll Cart must have a minimum 5/8 -inch diameter axle with a corrosion -resistant coating that must be securely attached to the body by molded axle retainers. • The wheels and axle must be rated to meet the maximum load requirement of 3.5 pounds per gallon. Stability 0 Roll Carts must be able to remain stable and upright in winds up to 30 miles per hour when empty. Color 0 Color must not be streaked in the finished product and must be colorfast so that the color does not alter significantly with normal use. Painted Roll Carts are unacceptable. • The Garbage Roll Cart color is to be specified by the County. • The Recycling Roll Cart color is to be specified by the County. • The final color selection must be approved by the Contract Manager prior to manufacturing. Markings . All Roll Cart markings are subject to approval by the Contract Manager prior to order placement. • Sequential serial numbers must be molded, branded, or hot -stamped into the front of the body with white color. An eight to ten (8-10) alpha/numeric serial number shall be used as determined by the County. • A SWDD/County logo and recycling logo must be clearly molded, inscribed, or hot- stamped into both sides of the body with the following wording in 1 inch lettering: Property of Indian River County. • Lids must have the following markings: o Instructions for which side of the Roll Cart must face the street for collection. o Recycling Roll Cart lids must have an in -mold label with program instructions as provided by the County. o ANSI and regulatory labeling required. Warranty 0 Roll Carts must be fully (100%) warranted against defects in materials and workmanship for a minimum period of ten (10) years from the date of delivery and must be transferrable to SWDD/County at expiration of the Agreement. 54