2025-129 - Laserfiche WebLink

Home Browse Search

J. The COUNTY shall obtain the As -Built drawings from the General Contractor awarded the project. The project contract documents will be prepared to specify this requirement. SCOPE OF SERVICES The CONSULTANT agrees to perform professional services in connection with the project as required and as set forth in the following: A. GENERAL 1. The CONSULTANT will provide professional engineering and architectural Consultant services for the preparation of site and building construction plans, including surveying, civil engineering, architectural design, structural engineering, geotechnical engineering, mechanical and electrical engineering, preparation of working drawings, an opinion of probable cost, field inspections and reports, and related construction administration services, for the construction of site and building improvements necessary for the development of the new Service Building. 2. The CONSULTANT shall prepare all building architectural and building engineering system designs, including structural, mechanical, and electrical systems, except the structural engineering and design normally provided by the steel manufacturer for pre-engineered steel structures. 3. The CONSULTANT shall prepare all site structure designs, including but not limited to, flag pole foundation, dumpster enclosure, grade level walkways, curbing, wheel stops, bollards, culverts, transformer pad, headwalls, and signage. All site structures shall comply with the wind pressure requirements in 2020 Florida Building Code for high velocity wind zones. 4. The CONSULTANT will provide a site plan conforming to 2020 Florida Building Code accessibility requirements including building location, and accessible route to other buildings on site and required entries and exits, sidewalks, accessible route to public R.O.W., parking, vehicular use areas, curb cuts, driveways, circulation, site lighting, light pole locations, selected fixture manufacturer's photometric site overlay, utility and drainage facilities, site data and site calculations. The format for this documentation will be AUTO CAD (latest version), and shall clearly show the area for placement of the buildings/improvements required in the program data. 5. The CONSULTANT'S preliminary planning and programming efforts for the Service Building should take into account the following: A. The service building should be a pre -fabricated steel structure (to match the existing service building), approximately 51' x 61', providing 2 service bays, parts and equipment storage, optimal equipment location utilized to service transit vehicles. 4