10/23/2025 - Laserfiche WebLink

Home Browse Search

(5) Adjacent existing and allowable uses and proposed compatibility measures (as identified in section 915.16); (6) Proposed open space and recreation areas and facilities; (7) Integration into public systems (as identified in section 915.17) including: (a) Utilities provisions (water, sewer, electric); (b) Roadways including connections and improvements; (c) Bikeways and sidewalks; (d) Streetlighting; (e) Recreation areas; and (f) Other public systems used or improved; (8) Proposed internal vehicular and pedestrian systems; (9) Proposed method of stormwater management; (10) Existing site conditions, including location and extent of areas covered by native vegetation, wetlands, and environmentally significant (such as xeric scrub, coastal tropical hammock, pine flatwoods) features. Also, the location and extent of existing drainage features and existing and proposed waterbodies. (Ord. No. 2012-021, § 1, 7-10-12) Section 915.24. Planned development conceptual plan submittal requirements. To initiate review of a conceptual planned development plan, the applicant shall submit to the planning division the following: (1) A completed conceptual planned development plan application form (furnished by the planning division) along with the appropriate review fee; (2) Two (2) copies of the property owner's (s') deed and one (1) letter of authorization from the property owner(s) on behalf of the project applicant or agent if different from the owner(s). (3) Seven (7) to scale twenty -four -inch by thirty -six-inch plan sets of the project at a scale not greater than one (1) inch equals fifty (50) feet (a smaller scale may be used for all or part of the project depiction when the project cannot fit on a twenty -four -inch by thirty -six-inch plan sheet, upon approval by the community development director) which shall include the following graphic and written information: (a) The location and area of all proposed uses and mixture of uses with the appropriate measure of intensity for each use (density or square feet of gross floor area); (b) A project phasing plan depicting all phase boundaries and a proposed timetable (by year) for each phase which demonstrates compliance with section 915.10 and the phasing requirements of Chapter 913 and Chapter 914. All plan sheets within each plan set shall depict phase boundaries and designations; (c) Tabulations showing the following for each phase, successive groupings of phases (a "running" tabulation over phase time), and for the total project: (Supp. No. 151) Gross area; Units and density, and dwelling unit computation as specified in subsection 915.08(4); Page 24 of 29 Created: 2025-06-25 14:39:52 [EST] 29