Laserfiche WebLink
• <br />ORDINANCE NO. 2000- 0 2 6 <br />Maximum Lot <br />percent <br />Unit of Measure <br />10 <br />20 <br />Coverage <br />I <br />10,000 <br />180 <br />170 <br />Minimum Open <br />percent <br />- <br />Space <br />20 <br />Side* <br />10 <br />Legally created lots of record existing prior to June 18, 1991, in the Con -2 and Con -3 <br />districts, may be developed for one (1) single-family dwelling each, regardless of density, provided <br />all other land development regulation provisions are satisfied. Single-family dwelling construction <br />on these lots must meet the size and dimension requirements of the RS -I district. <br />*NOTE: A 1 foot additional setback is required for every 1 foot in building height over 25 feet in <br />building height For example a building or portion of a building that has a 35 foot building height, <br />as defined in the land development reegulations must have an additional 10 foot setback from any <br />adjacent front. side. or rear property line to that portion of the building that exceeds 25 feet in <br />building height. <br />D. LOR zoning Chapter Section criteria table 911.13(3)(h) for the ROSE -4 district is <br />hereby amended as follows: <br />(h) Size and dimension criteria: <br />ROSE -4 DISTRICT <br />Regulation <br />Size <br />Unit of Measure <br />Maximum density <br />4.0 <br />d.u. per gross acre <br />Minimum lot size <br />10,000 <br />square feet <br />Minimum lot width <br />70 <br />feet <br />Minimum yard <br />Front* <br />20 <br />Side* <br />10 <br />feet <br />Rear* <br />20 <br />Coding: Words in 9WAw thfouO type are deletions from existing law. Words underlined are additions. <br />July 18, 2000 <br />71 <br />UWWd1 d1ding height and Page 7 of 11 <br />rK 114 PG 279 <br />• <br />