2015-131 - Laserfiche WebLink

Home Browse Search

B. The completed hazards analysis shall comply with the site-specific hazards analysis criteria outlined below for each facility listed in Attachment C. The primary guidance documents are Attachment I (Hazards Analysis Contract Checklist and CAMEOfm Guide) to this Agreement and the U.S. Environmental Protection Agency's "Technical Guidance for Hazards Analysis" at; http:l/www.epa.gov/emergencies/docs/chem/tech.pdf. All hazards analyses shall be consistent with the provisions of these documents. Any variation from the procedures outlined in these documents must be requested in writing, submitted in advance and approved by the Division. C. Conduct an on-site visit at each Attachment C facility to ensure accuracy of the hazards analysis. Each applicable facility's hazards analysis information shall be entered into the U.S. Environmental Protection Agency's latest CAMEOfm version 3.0.1 (download from): http://www.epa.gov/emergencies/content/cameo/index.htm. Each facility hazards analysis shall include, but is not limited to, the following items: 1. Facility Information (CAMEOfm Facility Page) (a) Enter the facility name (per Attachment C) in the Facility Name field. (b) Enter the facility physical address (no Post Office Box) in the Street Address fields of the Address tab. (c) Enter the geographic coordinates (in decimal degrees) in the latitude/longitude fields of the Map Data tab. (d) Enter the maximum number of employees present at the facility at any given time in the Number of Employees on Site field of the ID Codes tab. (a minimum of one is required for unmanned facilities) (e) Enter the Facility phone number in the Facility Phones tab field. (f) Enter the name, title and 24-hour phone number of the designated facility emergency coordinator in the Contacts tab field. (g) Enter the main route(s) used to transport chemicals to the facility (from the County line to the facility) in the notes tab of the Facility Page. (h) Enter the route(s) used to exit the Vulnerable Zone(s) in the notes tab of the Facility Page. (i) Enter any past releases that have occurred in the last five years at the facility in the notes tab of the Facility Page. Include date, time, chemical name/quantity and number of persons injured or deaths (this information is available from the facility). If it is determined that a facility does not have a historical accident record, that shall be noted. 2. Hazard Identification (CAMEOfm Chemical in Inventory Page) (a) For each Extremely Hazardous Substance present over the Threshold Planning Quantity (TPQ), create a Chemical in Inventory page (if a Chemical in Inventory page hasn't been created already) and enter the proper chemical name and Chemical Abstract Service (CAS) number. (b) On each Chemical in Inventory page created for each Extremely Hazardous Substance present over the TPQ, enter in pounds (not range codes) the maximum quantity of each Extremely Hazardous Substance in the Max Daily Amount field of the Physical State and Quantity tab. 17