Laserfiche WebLink
Development Parameters/Waivers <br />ZONING <br />Village E (Single -Family) <br />- Minimum Lot Size <br />- Minimum Lot Width <br />- Minimum Yard Setbacks <br />-Front <br />-Rear <br />-Side <br />- Side for Accessory Structure <br />- Minimum Open Space <br />- Density <br />12.000 sq. ft. <br />80 ft. <br />10.000 sq. ft. <br />80 ft. <br />25 ft. <br />25 ft. <br />15 ft. <br />15 ft. <br />40% <br />up to 3 units/acre <br />Village F (Single -Family) <br />- Minimum Lot Size <br />- Minimum Lot Width <br />- Minimum Yard Setbacks <br />-Front <br />-Rear <br />-Side <br />- Side for Accessory Structure <br />- Minimum Open Space <br />- Density <br />25 ft. <br />25 ft. <br />15 ft. <br />40% <br />2.06 units/acre <br />1'.000 sq. ft. <br />80 ft. <br />6.250 sq. ft. <br />50 ft. <br />25 ft. <br />25 ft. <br />15 ft. <br />15 ft. <br />40% <br />up to 3 units/acre <br />Note: Pro. •sed Chan es Are in Reverse Prin <br />25 ft <br />25 ft. <br />5 ft. <br />15 ft. <br />40% <br />2.33 units/acre <br />:Vote: Where no waivers are requested. all size. dimensional cntena and setbacks are required to meet the RS -3 <br />zoning cntena. <br />Note: Although the density for some Villages is over 3 units per acre. the overall project <br />density is 2.49 units per acre Thus. the project is under the RS -3 density limits. <br />Note: Pools, patios. decks, and enclosures must be set back at least 10 feet from a perimeter <br />propene line for single-family homes, -x - .t alon . the east <br />there will be a 20' no build zone. <br />line of Villa ' C wher <br />The approved conceptual PD plan requires a Type "B" 25' agricultural buffer <br />line of Village "C' . along the east proper}� <br />According to the approved plan. the Type "B" buffer could be reduced to a <br />Type 'C buffer, if the agricultural use/exemption were removed from the property to the east. <br />Even with removal of the adjacent agricultural use. the Type "C" buffer is still required since the <br />Village C perimeter lots could be less than the RS -3 minimum lot size of 12.000 SF. In this case. <br />the Type ' C" buffer serves to meet the compatibility standards of the PD ordinance. By meeting the <br />compatibility requirements for the less than 12.000 square foot lot size. the Type "C buffer will also <br />meet the compatibility standards for the proposed reduced side yard setbacks for Village C lots. <br />March 6, 2001 <br />