2008-046 - Laserfiche WebLink

Home Browse Search

Task 2.1 -Financial Assurance Report CDM will prepare documentation that demonstrates proof of financial assurance for the cost of closing and providing long-term care for the Class I Landfill, the C&D Debris Landfill, and the Waste Tire Processing center. This documentation will be submitted for review by the SWDD and IRC Finance Department. Six copies of the final document will be provided to SWDD. CDM will meet with SWDD up to six times to discuss issues and to provide needed coordination. CDM will also respond to FDEP correspondence regarding financial assurance. Task 2.2 - Survey and Airspace Assessment CDM will provide surveys and assessments of consumed airspace, performed by Erdman Anthony of Florida, Inc. for the Class I and C&D Landfills. The survey work for the Class I waste area will include a complete topographic survey of the `Infill', the entire Segment I cell, as well as the ditches and roadways surrounding the Class I area. The topographic survey of the C&D Landfill site will include the waste area, as well as the fence -line and the surrounding ditches and berms adjacent to the C&D site and the C&D expansion area. CDM will review the volumetric modeling and include a summary of estimated waste density based on the results of the survey and volumetric modeling. The deliverable from Erdman Anthony of Florida, Inc. will consist of a survey report identifying the dates the field survey was completed. Airspace consumed and remaining airspace based on construction and design criteria shall be specifically identified. The survey report shall also include the results of the volumetric calculations for the Segment II portions of the Class I landfill, as well as the C&D Landfill and the new C&D expansion area. Deliverables accompanying the report shall include: A 1 -inch = 50 feet scale contour map for each site with 1 -foot contour intervals in regular weight lines, and 5 -foot contour intervals in bold weight lines. Signed and sealed contour maps will be provided on 24 -inch by 36 -inch paper of each landfill site in 1 -inch = 200 feet scale. A diskette or CD with ASCII file of the survey data in AutoCAD 2004 will also be provided. For the Class I Landfill, the report shall include an evaluation of the compaction of the waste and an analysis as to whether Waste Management Inc. is meeting its contractual compaction requirements. For the C&D site, an evaluation of footprint and side slopes shall be provided, with an analysis as to whether the site is being operated and constructed in accordance with the permitted design. CDM will include escrow account balance recommendations for Fiscal Year 2007-2008, as well as escrow account budget recommendations for Fiscal Year 2008-2009. TASK 3.0 - GENERAL TECHNICAL ASSISTANCE CDM will provide general technical assistance to IRC SWDD staff on an as needed basis. SWDD staff are performing a number of the tasks required annually by the current FDEP landfill permits. CDM will provide support as needed for the SWDD staff as they perform these tasks. Each task will be authorized and documented up to the budgeted amount for this task. General technical assistance tasks may include review of compliance reports, attendance of meetings with regulatory agencies, and attendance of miscellaneous meetings and workshops. A-2 bi si s.doc