|
§ 3.12.4 Shop Drawings, Product Data, Samples and similar submittals are not Contract Documents . The purpose of
<br /> their submittal is to demonstrate for those portions of the Work for which submittals are required by the Contract
<br /> Documents the way by which the Contractor proposes to conform to the information given and the design concept
<br /> expressed in the Contract Documents . Review by the Architect is subject to the limitations of Section 4 . 2.7 .
<br /> Informational submittals upon which the Architect is not expected to take responsive action may be so identified in
<br /> the Contract Documents. Submittals which are not required by the Contract Documents may be returned by the
<br /> Architect without action.
<br /> § 3.12.5 The Contractor shall review for compliance with the Contract Documents, approve and submit to the
<br /> Architect Shop Drawings, Product Data, Samples and similar submittals required by the Contract Documents with
<br /> reasonable promptness and in such sequence as to cause no delay in the Work or in the activities of the Owner or of
<br /> separate contractors . Submittals which are not marked as reviewed for compliance with the Contract Documents and
<br /> approved by the Contractor may be returned by the Architect without action .
<br /> § 3. 12.6 By approving and submitting Shop Drawings, Product Data, Samples and similar submittals , the Contractor
<br /> represents that the Contractor has determined and verified materials, field measurements and field construction
<br /> criteria related thereto, or will do so, and has checked and coordinated the information contained within such
<br /> submittals with the requirements of the Work and of the Contract Documents .
<br /> § 3 . 12.7 The Contractor shall perform no portion of the Work for which the Contract Documents require submittal
<br /> and review of Shop Drawings, Product Data, Samples or similar submittals until the respective submittal has been
<br /> approved by the Architect.
<br /> § 3.12.8 The Work shall be in accordance with approved submittals except that the Contractor shall not be relieved of
<br /> responsibility for deviations from requirements of the Contract Documents by the Architect ' s approval of Shop
<br /> Drawings, Product Data, Samples or similar submittals unless the Contractor has specifically informed the Architect
<br /> in writing of such deviation at the time of submittal and ( 1 ) the Architect has-has, with prior approval of the Owner,
<br /> given written approval to the specific deviation as a minor change in the Work, or (2) a Change Order or
<br /> Construction Change Directive has been issued authorizing the deviation. The Contractor shall not be relieved of
<br /> responsibility for errors or omissions in Shop Drawings , Product Data, Samples or similar submittals by the
<br /> Architect ' s approval thereof.
<br /> § 3.12.9 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings , Product Data,
<br /> Samples or similar submittals, to revisions other than those requested by the Architect on previous submittals . In the
<br /> absence of such written notice the Architect' s approval of a resubmission shall not apply to such revisions.
<br /> § 3. 12.10 The Contractor shall not be required to provide professional services which constitute the practice of
<br /> architecture or engineering unless such services are specifically required by the Contract Documents for a portion of
<br /> the Work or unless the Contractor needs to provide such services in order to carry out the Contractor' s
<br /> responsibilities for construction means, methods, techniques, sequences and procedures . The Contractor shall not be
<br /> required to provide professional services in violation of applicable law. If professional design services or
<br /> certifications by a design professional related to systems, materials or equipment are specifically required of the
<br /> Contractor by the Contract Documents, the Owner and the Architect will specify all performance and design criteria
<br /> that such services must satisfy . The Contractor shall cause such services or certifications to be provided by a
<br /> properly licensed design professional, whose signature and seal shall appear on all drawings, calculations,
<br /> specifications, certifications , Shop Drawings and other submittals prepared by such professional . Shop Drawings
<br /> and other submittals related to the Work designed or certified by such professional, if prepared by others , shall bear
<br /> such professional ' s written approval when submitted to the Architect. The Owner and the Architect shall be entitled
<br /> to rely upon the adequacy , accuracy and completeness of the services, certifications or approvals performed by such
<br /> design professionals, provided the Owner and Architect have specified to the Contractor all performance and design
<br /> criteria that such services must satisfy. Pursuant to this Section 3 . 12 . 10, the Architect will review, approve or take
<br /> other appropriate action on submittals only for the limited purpose of checking for conformance with information
<br /> given and the design concept expressed in the Contract Documents. The Contractor shall not be responsible for the
<br /> adequacy of the performance or design criteria required by the Contract Documents .
<br /> AIA Document A201 TM — 1997. Copyright ® 1911 , 1915, 1918, 1925, 1937, 1951 , 1958, 1961 , 1963, 1966, 1967, 1970, 1976, 1987 and 1997
<br /> by The
<br /> American Institute of Architects. All rights reserved. WARNING : This AIAe Document Is protected by U.S. Copyright Law and International Treaties.
<br /> 16
<br /> Unauthorized reproduction or distribution of this AIAe Document, or any portion of It, may result In severe civil and criminal penalties, and will
<br />be
<br /> prosecuted to the maximum extent possible under the law. This document was produced by AIA software at 17 : 14:54 on 05/25/2005 under Order
<br /> No. 1000126313_1 which expires on 6/29/2005, and is not for resale.
<br /> User Notes: (3418817618)
<br />
|