2007-085 - Laserfiche WebLink

Home Browse Search

5. Remote Lighting Control System : System shall include lighting contactors. System shall allow owner and users with a security code to schedule on/off system operation via a web site, phone, fax or email up to ten years in advance. Manufacturer shall provide and maintain a two- way TCP/IP communication link. Trained staff shall be available 24/7 to provide scheduling support and assist with reporting needs . The owner may assign various security levels using a user code and password to schedulers by function and/or fields. This function must be flexible to allow a range of privileges such as full scheduling capabilities for all fields, to only having permission to execute "early off' commands by phone or extend the field usage. On site equipment shall include Manual Off-On-Auto Switches to allow for maintenance, and shall accept and store 7-day schedules . The controller shall be protected against power outages / memory loss and shall reboot once power is regained and execute any commands that would have occurred during outage . 6. Management Tools: Manufacturer shall make available a web-based database of actual field usage and provide reports by facility and user group . 7. Communication Costs : Manufacturer shall include communication costs for operating the controls and monitoring system for a period of 25 years. II . SPORTS LIGHTING = SPORTSCLUSTER GREENTIM SYSTEM A. BASE BID LIGHTING EQUIPMENT The primary goals of this sports lighting specification are: 1 . Life Cycle Costs : In order to reduce the operating budget, the preferred lighting system shall be energy efficient and cost effective to operate. 2. Environmental Light Control: It is the primary goal of this project to minimize spill light and glare. 3 . Guaranteed Light Levels : Selection of appropriate light levels impact the safety of the players and the enjoyment of spectators. Therefore the lighting system shall be designed such that the light levels are guaranteed for a period of 10 years . B. LIGHTING PERFORMANCE / PLAYABILITY The manufacturer shall supply lighting equipment to meet the following performance and life cycle cost criteria: 1 . Playing surfaces shall be lit to an average constant light level and uniformity as specified per the bid sheet. Light levels shall be held constant for 5000 hours. Lighting calculations shall be developed and field measurements taken on the grid spacing with the minimum number of grid points specified on the bid sheet. Measured average illumination level shall be +/- 10% of predicted mean in accordance with IESNA RP-6-01 , and measured at the first 100 hours of operation . 2. Manufacturer shall provide computer models guaranteeing light levels on the field for 10 years with a recoverable light loss factor of .7 in all applications . C. LIFE CYCLE COST 1 . Energy Consumption : The average kWh consumption shall be calculated by the following criteria: # luminaries x kw demand x kw rate of .22/hr x annual usage of 400 hours x 25 years . Jacksonville Spec 04-24r5.doc 7 Created on 1211 /2006 4:32 PM