Laserfiche WebLink
Y <br /> SECTION 08362 - SECTIONAL OVERHEAD DOORS - GALVANIZED STEEL <br /> PART 1 - GENERAL <br /> 1.01 QUALITY ASSURANCE <br /> A. Qualifications of Manufacturer: Products used in the work of this section shall be <br /> produced by a manufacturer regularly engaged in the fabrication of similar products <br /> and with a history of successful production acceptable to the Architect, such as <br /> those manufacturers listed below. <br /> B. All doors specified under this Section shall be guaranteed against defective <br /> materials, workmanship, and paint coatings for a period of 1 year following <br /> occupancy certificate. <br /> C. Installer: Installation of sectional doors shall be performed by the authorized <br /> representative of the manufacturer. <br /> D. Single-Source Responsibility: Provide doors, tracks, motors, and accessories from <br /> one manufacturer for each type of door. Provide secondary components from source <br /> acceptable to manufacturer of primary components. <br /> 1.02 DESCRIPTION OF WORK <br /> A. Work included: Provide and install all upward-acting sectional doors as scheduled <br /> and detailed in the construction documents and as specified herein. Related work: <br /> Preparation of opening, primed steel jambs, structural backing, miscellaneous iron <br /> work, electrical wiring, and glazing (if scheduled on the plans) are in the scope <br /> of work of other divisions or trades. <br /> 1.03 SUBMITTALS <br /> A. Product Data: Submit manufacturer's product data and installation instructions for <br /> each type of sectional door. Include both published data and specific data prepared <br /> for this project. <br /> B. Shop Drawings: Submit shop drawings for approval prior to fabrication. Include <br /> detailed plans, elevations, details of framing members, required clearances, anchors <br /> and accessories . Include relationship with adjacent materials. <br /> 1.04 DELIVERY, STORAGE AND HANDLING <br /> A. Deliver materials and products in labeled protective packages. Store and handle in <br /> strict compliance with manufacturer' s instructions and recommendations. Protect <br /> from damage from weather, excessive temperatures and construction operations. <br /> PART 2 - PRODUCTS <br /> 2.01 ACCEPTABLE MANUFACTURERS <br /> A. Doors shall be Galvanized Steel Sectional Overhead type as <br /> manufactured by one of the following companies: <br /> 1 . Clopay Building Products Company. <br /> 08362-1 <br />