Laserfiche WebLink
(e) Thermal environment—( 1 ) Performance requirement. The dwelling unit must have <br /> and be capable of maintaining a thermal environment healthy for the human body . <br /> (2) Acceptability criteria. ( i ) There must be a safe system for heating the dwelling unit <br /> (and a safe cooling system, where present) . The system must be in proper operating <br /> condition . The system must be able to provide adequate heat (and cooling , if applicable) , <br /> either directly or indirectly , to each room , in order to assure a healthy living environment <br /> appropriate to the climate . <br /> (ii ) The dwelling unit must not contain unvented room heaters that burn gas, oil , or <br /> kerosene . Electric heaters are acceptable . <br /> (f) Illumination and electricity—( 1 ) Performance requirement. Each room must have <br /> adequate natural or artificial illumination to permit normal indoor activities and to <br /> support the health and safety of occupants . The dwelling unit must have sufficient <br /> electrical sources so occupants can use essential electrical appliances . The electrical <br /> fixtures and wiring must ensure safety from fire . <br /> (2 ) Acceptability criteria. (i ) There must be at least one window in the living room and in <br /> each sleeping room . <br /> (ii ) The kitchen area and the bathroom must have a permanent ceiling or wall light fixture <br /> in proper operating condition . The kitchen area must also have at least one electrical <br /> outlet in proper operating condition. <br /> ( iii ) The living room and each bedroom must have at least two electrical outlets in proper <br /> operating condition . Permanent overhead or wall-mounted light fixtures may count as one <br /> of the required electrical outlets. <br /> (g) Structure and materials—( 1 ) Performance requirement. The dwelling unit must be <br /> structurally sound . The structure must not present any threat to the health and safety of <br /> the occupants and must protect the occupants from the environment . <br /> ( 2) Acceptability criteria. (i) Ceilings , walls , and floors must not have any serious defects <br /> such as severe bulging or leaning, large holes, loose surface materials, severe buckling, <br /> missing parts, or other serious damage . <br /> (ii ) The roof must be structurally sound and weathertight . <br /> ( iii) The exterior wall structure and surface must not have any serious defects such as <br /> serious leaning, buckling, sagging, large holes , or defects that may result in air infiltration <br /> or vermin infestation . <br /> (iv) The condition and equipment of interior and exterior stairs, halls , porches, walkways, <br /> etc . , must not present a danger of tripping and falling . For example, broken or missing <br /> steps or loose boards are unacceptable . <br />