Laserfiche WebLink
AF. ASME/ANSI B 16.9 — Pipe Fittings. <br />1.04 SUBMITTALS <br />A. Product Data: Provide data on pipe fittings, valves, and accessories. <br />B. Manufacturer's Certificate: Certify that pipe, fittings, and valves meet or exceed respective <br />ANSI, AWWA, and/or NSF Standards. <br />1.05 QUALITY ASSURANCE <br />A. Perform Work in accordance with Indian River County Utilities Minimum Design and <br />Construction Standards, where applicable. <br />B. Fabricated piping shall meet all ASME code requirements as specified herein. <br />C. Valves: Manufacturer's name and pressure rating marked on valve body. <br />1.06 DELIVERY, STORAGE, AND HANDLING <br />A. Deliver and store valves in shipping containers with labeling in place. <br />PART 2 - PRODUCTS <br />2.01 GENERAL <br />Although they may not be specifically shown on the drawings or called for elsewhere in the <br />Technical Provisions, the Contractor shall include the cost of all fittings, piping supports, and <br />miscellaneous appurtenances needed to provide a secure, workable pipe and valve system. <br />Equipment suction and discharge piping and other exposed piping shall be supported by reinforced <br />concrete pedestals, piers, adjustable pipe supports, thrust restraints, hangers, and tie rods as <br />necessary to insure a stable installation. Adjustable pipe supports or piers shall be arranged to <br />relieve attached equipment of all strain due to the weight of the pipe, fittings, valves, and the <br />contents of the pipe. <br />2.02 PRODUCT LIST <br />All products shall conform to the Approval Product List of the Indian River County Utilities <br />minimum Design and Construction Standards, latest edition, unless specifically specified herein. <br />2.03 PIPE <br />A. Ductile Iron Pipe: Ductile iron pipe and fittings shall conform to AWWA C150, C151 and <br />C153. <br />1. Joints: Buried pipe shall be AWWA approved push -on or mechanical joint pipe <br />I (AWWA/ANSI C111/C21.11). Exposed joints shall be AWWA approved flanged <br />joint pipe, in accordance with ANSI/AWWA C115, or as detailed on the drawings. <br />044572017 <br />15100-3 <br />