Laserfiche WebLink
1 .06 QUALITY ASSURANCE <br /> A . Furnish all coating materials by a single manufacturer. Solvent, thinners, and other <br /> miscellaneous materials can be supplied by the same manufacturer or by a supplier approved by <br /> the manufacturer . <br /> B . Fumish a statement to the Engineer from the coatings manufacturer that materials to be used by <br /> the Contractor comply with the manufacturer' s recommendations . <br /> C . The Engineer reserves the right to require qualification of the product manufacturer and <br /> applicator, including satisfactory completion of at least two (2) projects of this nature . <br /> D . Manufacturer's Inspection Meeting: After set-up for painting but before commencing work, <br /> conduct a meeting at the site among representatives of the paint manufacturer, contractor, <br /> painting contractor, and Engineer to inspect the facility and review procedures recommended by <br /> the manufacturer for the prevailing conditions. <br /> 1 .07 REGULATORY REQUIREMENTS <br /> A. Comply with all federal, state, and local health and fire regulations when handling and applying <br /> paint and coating products. <br /> 1 .08 SUBMITTALS <br /> A. Manufacturer's Data: Submit manufacturer's technical information including paint label <br /> analysis, surface preparation and application instructions for each material proposed for use. <br /> Indicate the surfaces to which each material is to be applied . <br /> B . Samples; Painting: Submit samples for Engineer's review of color and texture only. Provide a <br /> ilisting of material and application for each coat of each finish sample. <br /> C . Manufacturer's Certificate: Submit a written certification from the paint manufacturer that <br /> materials furnished for the work meet or exceed specified requirements. <br /> D . Prepare a detailed painting schedule. List each Painting System to be used by Painting System <br /> Number, define extent and limits of each system and colors (by name and number) where <br /> appropriate. <br /> 1 .09 PRODUCT DELIVERY AND STORAGE <br /> A. Deliver all materials to the jobsite in original, new and unopened packages and containers <br /> bearing manufacturer's name and label, and the following information; <br /> 1 . Name or title of material. <br /> 2. Fed Spec. number, if applicable. <br /> +� 3 . Manufacturer's stock number and date of manufacture. <br /> 1 4 . Manufacturers name. <br /> 5 . Contents by volume, for major pigment and vehicle constituents. <br /> I 6 . Thinning instructions. <br /> l 044572017 <br /> 09900-3 <br />