2008-276 D - Laserfiche WebLink

Home Browse Search

C. All motors shall be fitted with a permanent, non-corrosive nameplate indelibly stamped or engraved with NEMA Standard motor data, including bearing description and lubrication instructions. Insulation class, ambient temperature, altitude rating, and power factor at full load, if applicable , shall be included . 2 .04 MANUFACTURER A. The driven equipment Supplier shall have responsibility to select and supply suitable electric motors for the equipment _ The choice of motor manufacturer shall be subject to review by the Engineer . Such review will consider future availability of replacement parts and compatibility with other equipment. B . Suppliers , or equal : 1 . General Electric 2 , Siemens-Allis 3 . U . S . Motors PART 3 - EXECUTION 3 .01 INSTALLATION A. Motor installation shall be performed in accordance with the motor manufacturer's written recommendations and the written requirements of the manufacturer of the driven equipment. Field installation of the unit shall include final alignment. B . Installation shall also include furnishing necessary oil and grease for initial operation and making final adjustments to place the equipment in operable condition. C. Electrical work involving connections, controls, switches, disconnects, and etc , shall be performed as provided in the applicable Sections of Division 16 . 3 .02 FIELD TESTS A. The Contractor shall megger each motor winding before energizing the motor, and, if insulation resistance is found to be low, shall notify the Engineer and shall not energize the motor. Satisfactory readings shall be as stated by the motor manufacturer. B . The Contractor shall check all motors for correct clearances and alignment and for correct lubrication, and shall lubricate if required in accordance with Manufacturer's instructions. The Contractor shall check direction of rotation of all motors and reverse connections if necessary, i i I I i 044572017 16490 - 8