Laserfiche WebLink
AMENDMENT #1 TO EXHIBIT #1 <br />01/24/2008 <br />Page 2 <br />• Scope of Services <br />Task A — Contract Plans/Specifications <br />Masteller & Moler, Inc. will provide for the necessary surveying information and prepare <br />construction plans, specifications and contract documents to be incorporated in the original <br />project plans, specifications and contract documents covering the following project <br />Modifications and Additions: <br />• Removal of approximately 16,000 LF of existing force main and replacing it with <br />approximately 16,000 LF of 16" reuse main with all necessary fittings, valves and <br />accessories. <br />• Design a directional bore from the south side to the north side of Hobart Road to extend <br />the proposed 16" reuse pipeline to the future Reuse Storage Tank site. <br />• Disconnect and cap the existing 8" force main extending east along the south side of <br />Hobart Road and also extending to the south from 57 h Street. <br />• Modify the existing piping at two (2) separate locations providing reuse water to the <br />Sandridge Golf Course with appropriate valves and fittings in order that the existing <br />reuse main and the proposed 16" reuse main can feed the Sandridge Golf Course with <br />both pipelines or with each pipeline independently. <br />• Reconstruct the existing 12" pipeline from the Bend Pine rapid infiltration basin area <br />north under the existing ditch in order to increase the cover over the pipeline as it passes <br />under the ditch. <br />It is assumed that because the proposed reuse system is consistent with the County's Master <br />Plan, FDEP permitting will not be required. <br />Task B — Construction Services <br />Masteller & Moler, Inc. will provide construction services including periodic observation of <br />the pipeline modifications and additions covered in this Addendum #1 on an as needed <br />basis to observe that construction is in reasonable compliance with the contract plans. We <br />will attend meetings, review shop drawings and monthly pay estimates from the contractor. <br />