2007-263D - Laserfiche WebLink

Home Browse Search

IRC Administration Complex Property Appraisers Office - Punch List - Friday - 07/06/07 July 10, 2007 Page 11 Work Room 621 (continued) 4. Opening leading to Corridor 612 bottom right and left sides need to be repainted and vinyl base needs to make sure it is secured to the corners. 5. Electrical outlet the drywall to the top left/right, top left of electrical outlet cover to the left of the opening leading into Corridor 624 drywall is damaged, needs to be patched and repaired. 6. Ceiling tile is chipped coming off the left opening leading into Corridor 624, the 4h tile off the left opening, file is chipped . Also, to the left of that same tile, one single tile not setting flush in the grid. 7. This area above the door opening leading into 624 Office 621 ceiling tile does not seem to be level, the grid does not seem to be level, very irregular. & Ceiling tile is chipped, the 4 h ceiling file off the north wall and two ceiling tiles to the right of the right corner of the opening leading into Corridor 624. Comauter Room 623 1 . Drywall to the right and left of Door 617A on the inside needs to be sanded and repainted. That is also true of the drywall above the vinyl base to the right of Door 617A . 2. All walls need to be touched-up with paint where there is dirt and fingerprints, etc., and vinyl base needs to be cleaned of scuff marks, paint, etc . 3 . Door 623A — Bottom right of Door 623A drywall needs to be sanded and repainted and vinyl base needs to be re-secured to the wall. 4. Left side of hollow metal frame drywall where it abuts the frame needs to be sanded and repainted. That is also true at the head where the drywall abuts the head of Door 623. 5. Electrical outlet to the left of Door 623 needs to be sanded and repainted, patched and repaired, chips around the opening of the electrical outlet cover plate. 6. Borrowed light 623 BL right side drywall jamb and drywall needs to be sanded, caulked and repainted. That is also true of the bottom left jamb the head where it abuts the drywall needs to be sanded, caulked and repainted. Also, the underside of borrowed light BL1 623 drywall needs to be sanded, caulked and repainted. 7. Electrical outlet cover to the bottom left of borrowed light 621 BLl drywall is irregular, needs to be sanded and repainted . 8 . North wall electrical outlet to the right of the FM200 Canister drywall is rough and irregular needs to be sanded and repainted. 9. Plywood back boards needs to be repainted with fire retarded paint where the paint finish has been chipped. 10. Ceiling grid directly in front of the electrical panel on the south wall, 5's grid off the electrical panel , finish is damaged. Production Room 625 1 . Furniture in place in this office. 2. Transition strip needed between carpet and VCT floor tile. 3. Drywall opening 625 leading into Production Room outside edges needs to be sanded and repainted, and vinyl base needs to be secured to the wall . 4. Vinyl base needs to be cleaned of drywall mud, dirt, debris and paint. 5 . South wall left inside corner by the boxed out column drywall mud on the VCT needs to be removed. Also in this area VCT is cut too short. 6. VCT has glue, drywall mud, scuff marks, etc . throughout. 7 . North wall above the right electrical outlet the drywall needs to be touched-up with paint. Also, in this general area scuff marks on the VCT flooring. 8. To the right of the opening off Corridor 624 fingerprints need to be touched-up with paint. 9. Ceiling tile about the center of the east wall, I " full ceiling tile off the wall is chipped. 10. Light fixture at the north end off the east wall by the return air grille lens diffuser is damaged. D O N A D I O & Associates, Architects, P.A.