2/10/1965 - Laserfiche WebLink

Home Browse Search

FEB01965 800K . : 9 PAGE 134 . A. Where district boundaries lie on or within streets, highways, roads, alleys, rail- road rights-of-way or public water, the district boundaries shall be the center line of the same. B. Where district boundary lines approximately bi-sect blocks, the boundaries are the medium lines of such blocks between the centerlines of boundary streets. C. Where district boundaries are approximately parallel to a street, highway, road, alley, railroad right-of-way or public water, the distance of such boundaries from the center- line thereof shall be, unless otherwise shown by dimension, the medium block line. D. In unsubdivided property or where a district boundary divides a subdivided lot, the location of such boundary, unless. the same is indicated by dimensions shall be determined by the use of the scale appearing on the district map. Where a district boundary divides a subdivided lot, the zone classification shall prevail of the greater portion throughout the lot. • E. Where any street, alley or public way is hereafter officially vacated or abandoned, the part of parcel thereof accruing to the abutting property shall be within the district of such abutting property. F. In case any further uncertainty exists, the Board of Adjustment shall interpret the intent of the district map as to location of such boundaries. G. If a lot has less area or width than required as a building site by the terms of this Resolution and if the same was of record at the time of the effective date of this Resolution or any amendment thereto and is situated in a zone having minimum requirements as to area or setback, then said lot may be used for the purposes permitted in the zone in which the lot is situated, complying as near as possible with the setback requirements irrespective of the area requirements. H. For irregular or pie shaped lots, the minimum required lot width shall be measured at the front building setback line. EXCEPT AS HEREINAFTER PROVIDED: 1. No building shall be erected, constructed, reconstructed or structurally altered nor shall any building or land be used which does not comply with all of the district regulations established by this Resolution for the district in which the building or land is located. 2. The minimum area, yards and other open spaces, including the intensity of use pro- visions contained in this ordinance for each and every building hereafter erected, constructed, reconstructed or structurally altered, shall not be encroached upon or considered as area, yard or open space requirements or intensity of use requirements for any other building. 3.. In single family districts, every buildiz..I hereafter erected or structurally altered shall be located on a lot as herein defined and in no case shall there be more than the prin- cipal building and the customary accessory buildings on one lot or parcel of land. 4. Where front yards have been established or may be established.on each of two inter- secting streets, there shall be a front yard on each street side of a corner lot; provided, how- ever, that the buildable width of such lot shall not be reduced to less than 30 feet and provid= ed, further, that no accessory building on a corner lot shall project into the front lot line on either street. 5. Whenever a dwelling is to be erected in a district other than a residential district, it shall conform to the minimum setback requirements as stipulated in the R-3 Transient Dis- trict. 6.. No dwelling .shall be erected closer to another dwelling than double the minimum set- back restriction. 1: A building constructed on a site consisting of two lots must be located either within the required setback from the common or center lot line, or the building must be constructed on both lots.