Laserfiche WebLink
PART II — DUTIES, RESPONSIBILITIES AND LIMITATIONS OF AUTHORITY <br /> OF RESIDENT PROJECT REPRESENTATIVE <br /> 1 . GENERAL <br /> Resident Project Representative is OWNER ' S Agent, will act as directed by and under the <br /> supervision of OWNER, and will confer with ENGINEER regarding his actions. Resident Project <br /> Representative's dealings in matters pertaining to the on-site Work shall in general be only with <br /> OWNER and CONTRACTOR, and dealings with Subcontractors shall only be through or with the <br /> full knowledge of CONTRACTOR . Written communication with ENGINEER will be only <br /> through or as directed by OWNER. <br /> 2 . DUTIES AND RESPONSIBILITIES <br /> Resident Project Representative will : <br /> I . Schedules : Review the progress schedule, schedule of Shop Drawing submissions and <br /> schedule of values prepared by CONTRACTOR and consult with ENGINEER concerning <br /> their acceptability. <br /> 2 . Conferences: Attend preconstruction conferences. Arrange a schedule of progress <br /> meetings and other job conferences as required in consultation with ENGINEER and <br /> notify those expected to attend in advance. Attend meetings, and maintain and circulate <br /> copies of minutes thereof. <br /> 3 . Liaison : <br /> 4 . Serve as OWNER ' S liaison with CONTRACTOR, working principally through <br /> CONTRACTOR'S superintendent and assist him in understanding the intent of the <br /> Contract Documents . Assist OWNER in serving as OWNER'S liaison with <br /> CONTRACTOR when CONTRACTOR'S operations affect OWNER'S on-site operations. <br /> 5 . As requested by ENGINEER, assist in obtaining from OWNER additional details or <br /> information, when required at the job site for proper execution of the Work. <br /> 6. Shop Drawings and Samples: <br /> a. Receive and record date of receipt of Shop Drawings and samples, receive <br /> samples which are furnished at the site by CONTRACTOR, and notify <br /> ENGINEER of their availability for examination. <br /> b. Advise ENGINEER and CONTRACTOR or his superintendent immediately of <br /> the commencement of any Work requiring a Shop Drawing or sample submission <br /> if the submission has not been approved by the ENGINEER. <br /> 7 . Review of Work, Rejection of Defective Work, Inspections and Tests: <br /> a. Conduct on-site observations of the Work in progress to assist OWNER and <br /> ENGINEER in determining if the Work is proceeding in accordance with the <br /> Contract Documents and that completed Work will conform to the Contract <br /> Documents. <br /> b. Report to OWNER and ENG.-NEER whenever he believes that any Work is <br /> unsatisfactory, faulty or defective or does not conform to the Contract Documents, <br /> or does not meet the requirements of any inspections, tests or approval required to <br /> be made or has been damaged prior to final payment; and advise OWNER and <br /> ENGINEER when he believes Work should be corrected or rejected or should be <br /> uncovered for observation, or requires special testing, inspection or approval. <br /> c. Verify that tests, equipment and systems startups and operating and maintenance <br /> instructions are conducted as required by the Contract Documents and in presence <br /> 6706-43015 - 155\ 1 0/ 17/07 00800- 18 V RB <br />