2008-040 - Laserfiche WebLink

Home Browse Search

AMENDMENT 3 CR 510 FINAL ENGINEERING REPORT This is an amendment to the existing Final Design and Plans Preparation services agreement (AGREEMENT), dated November 17, 2005, by and between INDIAN RIVER COUNTY, hereinafter referred to as the COUNTY, and STANLEY CONSULTANTS, INC., hereinafter referred to as the ENGINEER. This amendment addresses changes in "Section I — Project Limits and Description, Section II — COUNTY Obligations, Section III — Scope of Services, Section IV — Time for Completion, and Section V - Compensation" of the AGREEMENT, by adding the services below. Amendment Description SECTION I - PROJECT LIMITS AND DESCRIPTION is being modified to incorporate the following engineering services: A. CR 510 Final Engineering Report. The report will cover the CR 510 corridor only and not side streets. The limits are from the intersection of CR510/CR512 to the bridge, number 880052, on the west bank of the Indian River. SECTION II — COUNTY OBLIGATIONS is being modified to incorporate the following: A. Provide right-of-way cost estimates. B. Obtain construction cost estimates from Kimley-Horn and McMahon and Associates for inclusion into the Final Engineering Report. C. Obtain documentation of roadway alignment and pond siting decisions from Kimley-Horn and McMahon and Associates for inclusion into the Final Engineering Report. D. Obtain documentation of utility impacts and required relocations of COUNTY owned utilities and non COUNTY owned utilities within easements from Kimley-Horn and McMahon and Associates for inclusion into the Final Engineering Report and cost estimating purposes. E. Obtain PDF files of key sheets, typical sections and roadway plan sheets from Kimley-Horn and McMahon and Associates for inclusion into the Final Engineering Report Appendix. SECTION III - SCOPE OF SERVICES is being modified to incorporate the following: Update the Draft Preliminary Engineering Report developed during the FDOT Project Development and Environmental (PD&E) Study, dated July 2005 to create a Final Engineering Report. The Final Engineering Report will include the alternative alignment analyses documented in the Draft PD&E Study and the County's SCALE criteria. The purpose of this report is to document the basis for the major engineering designs as of January 2008. This amendment does not include new alignment alternatives or new pond siting analysis. Preliminary CR 510 plan sheets that are available will be included in the appendix. The appendix will include the typical sections, plan sheets and other project documentation available as of January 1, 2008. CR 510 Amendment 3 Page I of 4 1/17/2008