2006-420 - Laserfiche WebLink

Home Browse Search

Jul • 30 . 1996 6 : 33FM No • ? IB7 F - 11 / 16 NEC NFC Unified Solutions, Inc. 4. 10. Provide applicable configuration detail for applications involving other service providers (i .e. paging service). 4. 11 . Submit database changes prior to Cutoff Date and approve System database. 5. NEAX Voice System Installation and Configuration (Excluding Terminals) NEC shall be responsible for the following: 5 . 1 . Install equipment rack and components, test power system, install rectifier and battery (if applicable). 5.2. Assemble the Main Distribution Frame (MDF) and the System Modules (as applicable) . 5 . 3. Interconnect the System Modules to the switch-side blocks on the MDF (as applicable). 5.4. Install, program, and test circuit cards to be used as interface to the NEAX voice system solution, including necessary MDF and integration connections. 5.5. Verify and/or develop trunk route and dial plan configurations with input from Customer design team (if applicable) . 5.6. Verify or configure system to the approved database, user classes of service, and toil and station restrictions (as applicable). 5.7. Develop the implementation-specific network diagram and equipment room diagram(s) with input from Customer and/or the design team. 5.8. Input Customer-approved database into the PBX. 5. 9. Determine that all local and long-distance services have been installed by the "Telco" at the customer's demarcation point (as applicable). 5. 10. Determine status of any dial-up or LANM/AN connections that will be made to the system for customer access. 5. 11 . Connect remote maintenance access to support NEC service access to system for duration of warranty and maintenance period (per Equipment List) 5. 12 . Cutover the system by MDF cross-connect (as applicable) and perform post-cutover testing. 5. 13 . Deliver system installation documentation. Customer shall be responsible for the following: 5. 14. Mutual identification of installation location. Ensure all power and cabling requirements are accessible to this location . 5. 15. If applicable, provide appropriately sized UPS. 6. 16. Approve and perform Customer-provided changes to equipment room(s). 5. 17. Adhere to cutoff date for database changes in Implementation Plan. 6. Station Cabling — Rouse NEC shall be responsible for the following: 6. 1 . Meet with Customer to discuss the location and condition of the existing station cable including any known problems. Plan the station-side of the MDF. 6.2. Test and label all telephone station cable for the number of locations specified in the Equipment List. Customer shall be responsible for the following: NEC Unlned Solutions, Inc. Proprietary And Confidential 11 Of 18 1003272 Y. 1 1177@006