Laserfiche WebLink
SUBMITTALS <br /> PART 1 : GENERAL <br /> iirr 1 .01 DESCRIPTION OF REQUIREMENTS <br /> E <br /> A . This Section specifies the general methods and requirements of submissions <br /> applicable to the following work-related submittals : Shop Drawings , Product Data, <br /> Samples, Construction Photographs , and Construction Schedules . Additional <br /> general submission requirements are contained in the General Conditions . <br /> Additional detailed submittal requirements will be specified in the technical <br /> specifications sections . <br /> Be All submittals shall be clearly identified by reference to Specification Section, <br /> Paragraph, Drawing No . or Detail as applicable . Submittals shall be clear and <br /> legible and of sufficient size for sufficient presentation of data. <br /> 1 . 02 SHOP DRAWINGS, SEAWALL DRAWINGS, PRODUCT DATA, SAMPLES <br /> x <br /> A. Shop Drawings and Seawall Drawings <br /> Shop drawings and seawall drawings include, but are not necessarily <br /> limited to , custom-prepared data such as fabrication and <br /> erection/installation (working) drawings, scheduled information, setting <br /> " diagrams, coordination drawings . Seawall Drawings shall include detailed <br /> construction drawings prepared by a Florida licensed professional engineer. <br /> Seawall drawings shall be prepared by the CONTRACTOR ' s engineer. <br /> 2 . The CONTRACTOR shall be responsible for submitting the drawings at <br /> the proper time so as to prevent delays to the project . <br /> 3 . The CONTRACTOR shall check all drawings regarding measurements , <br /> size of members , materials , and details to satisfy himself that they conform <br /> to the intent of this CONTRACT . Drawings found to be inaccurate or <br /> otherwise in error shall be returned to the CONTRACTOR for correction <br /> before submission thereof <br /> 4 . All details on the drawings submitted for approval shall show clearly the <br /> relation of the various parts to the main members and lines of the structure, <br /> and where correct fabrication of the work depends upon field <br /> measurements, such measurements shall be made and noted on the <br /> drawings before being submitted for approval . <br /> Be Product Data <br /> 1 . Product data include, but are not necessarily limited to, standard prepared <br /> r; <br /> data for manufactured products (sometimes referred to as catalog data) , such as the <br /> Page 20 of 55 <br />