Laserfiche WebLink
6 <br /> manufacturer's product specification and installation instructions, availability of <br /> colors and patterns , manufacturer's printed statements of compliances and <br /> applicability, roughing-in diagrams and templates , catalog cuts, product <br /> photographs, standard wiring diagrams, printed performance curves and <br /> operational-range diagrams , production or quality control inspection and test <br /> reports and certifications , mill reports, product operating and maintenance <br /> instructions and recommended spare-parts listing and printed product warranties, <br /> as applicable to the Work . <br /> " C . Samples <br /> 1 . Samples include, but are not necessarily limited to , physical examples of <br /> the work such as sections of manufactured or fabricated work, small cuts or <br /> containers of materials, complete units of repetitively-used products, <br /> color/texture/pattern swatches and range sets, specimens for coordination of visual <br /> effect, graphic symbols and units of work to be used by the ENGINEER or <br /> OWNER for independent inspection and testing, as applicable to the Work. <br /> 1 . 03 CONTRACTOR' S RESPONSIBILITIES <br /> A. The CONTRACTOR shall review shop drawings, seawall drawings, product data <br /> and samples , including those by subcontractors , prior to submission to determine <br /> and verify the following : <br /> 1 . Field measurements <br /> 2 . Field construction criteria <br /> 3 . Catalog numbers and similar data <br /> 4 . Conformance with the Specifications <br /> B . Each shop drawing, seawall drawing, sample and product data submitted by the <br /> CONTRACTOR shall have affixed to it the following Certification Statement <br /> including the CONTRACTOR's Company name and signed by the <br /> CONTRACTOR: " Certification Statement : by this submittal , I hereby represent <br /> that I have determined and verified all field measurements, field construction <br /> criteria, materials, dimensions, catalog numbers and similar data and I have <br /> checked and coordinated each item with other applicable approved shop drawings <br /> and all Contract requirements . " Drawings and product data sheets 11 -in x 17-in <br /> and smaller shall be bound together in an orderly fashion and bear the above <br /> r Certification Statement on the cover sheet. The cover sheet shall fully describe the <br /> packaged data and include a listing of all items within the package . Provide to the <br /> ENGINEER a copy of each submittal transmittal sheet for drawings , product data <br /> and samples at the time of submittal of said drawings, product data and samples to <br /> the ENGINEER. <br /> C . Notify the ENGINEER in writing, at the time of submittal, of any deviations in the <br /> submittals from the requirements of the Contract Documents . <br /> it <br /> Page 21 of 55 <br />