Laserfiche WebLink
SECTION 01340 <br />SUBMITTAL OF SHOP DRAWINGS, DESIGN DRAWINGS, PRODUCT DATA, AND <br />SAMPLES <br />1.1 SCOPE <br />A. Submit shop drawings, system design drawings, product data, and samples as <br />required by or inferred by the Drawings and Specifications. Submittals shall <br />conform to the requirements of Section 6.17 of the General Conditions, and as <br />described in this Section. <br />1.2 SHOP DRAWINGS <br />A. Shop drawings are original drawings, prepared by the CONTRACTOR, a <br />subcontractor, supplier, or distributor, which illustrate some portion of the Work; <br />showing fabrication, layout, setting, or erection details. <br />Be Shop drawings shall be prepared by a qualified detailer and shall be identified by <br />reference to specification section number, sheet, and detail numbers on the <br />Contract Drawings. <br />1.3 PRODUCT DATA <br />A. Product data are manufacturer's standard schematic drawings and <br />manufacturer's catalog sheets, brochures, diagrams, schedules, performance <br />charts, illustrations, and other standard descriptive data. <br />Be Modify standard drawings to delete information which is not applicable to the <br />project and supplement them to provide additional information applicable to the <br />project. <br />C. Clearly mark catalog sheets, brochures, etc., to identify pertinent materials, <br />products, or models. <br />1.4 DESIGN DRAWINGS <br />A. Design drawings are original drawings, prepared by a Florida licensed <br />professional engineer or other appropriately licensed design professional for the <br />CONTRACTOR, a subcontractor, supplier, or distributor, which illustrate some <br />portion of the work; showing fabrication, layout, setting, or erection details. <br />Last Revised 12/2007 <br />01340-1 Wabasso Beach Pk Restoration <br />FAPublic Works\Cliff Suthard\Wabasso Beach Park\A Construction Bid Documents\Bid Documents as of 1-9-2008\Technical <br />Specifications\Div 1\01340 - Submittal of Shop Drawings, Product Data, and Samples.doc <br />