Laserfiche WebLink
5 <br /> B . Tint each undercoat a lighter shade to facilitate identification of each coat if multiple coats of same <br /> material are to be applied. Tint undercoats to match color of topcoat, but provide sufficient difference in <br /> shade of undercoats to distinguish each separate coat. <br /> C . If undercoats or other conditions show through topcoat, apply additional coats until cured film has a <br /> uniform paint finish, color, and appearance. <br /> D . Apply paints to produce surface films without cloudiness, spotting, holidays, laps, brush marks, roller <br /> tracking, runs, sags, ropiness, or other surface imperfections . Cut in sharp lines and color breaks. <br /> 3A CLEANING AND PROTECTION <br /> A. At end of each workday, remove rubbish, empty cans, rags, and other discarded materials from Project <br /> site . <br /> B . After completing paint application, clean spattered surfaces . Remove spattered paints by washing, <br /> scraping, or other methods . Do not scratch or damage adjacent finished surfaces. <br /> C . Protect work of other trades against damage from paint application. Correct damage to work of other <br /> trades by cleaning, repairing, replacing, and refinishing, as approved by Architect, and leave in an <br /> undamaged condition. <br /> D . At completion of construction activities of other trades, touch up and restore damaged or defaced painted <br /> surfaces. <br /> 3 . 5 EXTERIOR PAINTING SCHEDULE <br /> A. Interior Concrete Substrates, Traffic Surfaces: <br /> 1 , Water-Based Clear Sealer System: MPI EXT 3 .2H . <br /> a. Prime Coat: Interior/exterior clear concrete floor sealer (water based) . <br /> b . Intermediate Coat: Interior/exterior clear concrete floor sealer (water based) . <br /> C , Topcoat: Interior/exterior clear concrete floor sealer (water based) . <br /> B . Cement Plaster Stucco Substrates : <br /> 1 , High-Build Latex System: MPI EXT 9 . 1H, applied to form dry film thickness of not less than 10 <br /> mils (0 .25 mm) . <br /> a. Prime Coat: As recommended in writing by topcoat manufacturer. <br /> b . Intermediate Coat : As recommended in writing by topcoat manufacturer. <br /> C , Topcoat: High-build latex (exterior) . <br /> C. Fiber-Cement Siding, Fascia and Trim, Soffit and Interior and Exterior Ceilings: <br /> 1 . Latex System: MPI EXT 3 . 3J. <br /> a. Prime Coat: Alkali-Resistant Primer as recommended in writing by topcoat manufacturer. <br /> b. Intermediate Coat: As recommended in writing by topcoat manufacturer. <br /> c . Topcoat: Latex (exterior) . <br /> 1 <br /> Wabasso Beach Park Revised 01/08/08 <br /> Indian River County 09911 - 5 <br /> DAA Project No . 6008 <br /> ilr <br />