Laserfiche WebLink
B . Tint each undercoat a lighter shade to facilitate identification of each coat if multiple coats of the same <br /> material are to be applied. Tint undercoats to match color of finish coat, but provide sufficient difference <br /> in shade of undercoats to distinguish each separate coat. <br /> C . If undercoats or other conditions show through final coat, apply additional coats until cured film has a <br /> uniform coating finish, color, and appearance . <br /> D . Apply coatings to produce surface films without cloudiness, spotting, holidays, laps, brush marks, runs, <br /> sags, ropiness, or other surface imperfections. Produce sharp glass lines and color breaks. <br /> 3A CLEANING AND PROTECTION <br /> A. At end of each workday, remove rubbish, empty cans, rags, and other discarded materials from Project <br /> site . <br /> B . After completing coating application, clean spattered surfaces. Remove spattered coatings by washing, <br /> scraping, or other methods. Do not scratch or damage adjacent finished surfaces . <br /> C. Protect work of other trades against damage from coating operation. Correct damage by cleaning, <br /> repairing, replacing, and recoating, as approved by Architect, and leave in an undamaged condition. <br /> D . At completion of construction activities of other trades, touch up and restore damaged or defaced coated <br /> surfaces . <br /> 3 . 5 INTERIOR HIGH-PERFORMANCE COATING SCHEDULE <br /> A. Cement Plaster Substrates: <br /> 1 . Water-Based Epoxy Coating System: <br /> a. Prime Coat: Water-based epoxy (interior and exterior), MPI #11 S. <br /> b . Intermediate Coat: Water-based epoxy (interior and exterior), MPI # 115 . <br /> C , Topcoat: Water-based epoxy (interior and exterior), MPI # 115 . <br /> END OF SECTION 09960 <br /> Wabasso Beach Park Revised 01/08/08 <br /> Indian River County 09960 - 5 <br /> DAA Project No . 6008 <br />