Laserfiche WebLink
SECTION 03000 <br />BOARDWALK <br />PART 1 - GENERAL <br />1.1 SCOPE <br />A. The work specified in this Section consists of furnishing all material, transportation, <br />tools, labor, and equipment to construct the boardwalk and dune overwalks and all <br />items called for or that can be reasonably inferred from the Drawings, <br />PART 2 - PRODUCTS <br />2.1 PRODUCTS <br />A. All wood shall be nominal sizes as shown on the plans; dressed sizes shall be as <br />published by the National Design Specifications for Wood Construction, Nominal <br />and Minimum Dressed Sizes of Lumber. <br />Be All piles shall be treated with a water borne MCQ, (micronized copper quaternary) <br />wood preservative, 0.40 pcf; and shall be kiln dried after treatment. All other wood <br />shall be treated with 0.25 pcf MCQ. Preservatives shall be applied in accordance <br />with AWPA Standards. <br />C. All wood shall be free of decay and other forms of damage. Each piece of lumber <br />shall be identified by the grade and treatment mark of a recognized organization <br />approved by the Southern Pine Inspection Bureau (SPIB) Standard Grading Rules <br />for Southern Pine and American Wood Preservers' Association Standards. <br />D. All wood for the railing shall be pressure treated Southern Pine #1 grade. All wood <br />for stringers and pile caps shall be pressure treated Southern Pine # 1 dense grade. <br />E. Deck planks shall be 2" x 6" Evergrain Wood Decking as shown on the plans. All <br />other deck planks if otherwise specified shall be 2" x 6" pressure treated Southern <br />Pine #1 grade. <br />F. All nails, screws, bolts, nuts and washers (fasteners) shall be Hot Galvanized (HG). <br />PART 3 - EXECUTION <br />3.1 EXECUTION <br />A. Pile caps shall be connected to the piles with two (2) equally spaced 3/8" bolts with <br />high strength 3" washers on both sides. Nuts shall be torqued to a minimum of 60 <br />Ib. -ft. <br />03000-1 03000 — Boardwalk <br />