Laserfiche WebLink
3 .4 ANCHORING POSTS <br /> A. Form or core-drill holes not less than 5 inches ( 125 mm) deep and 3/4 inch (20 nun) larger than OD of <br /> post for installing posts in concrete . Clean holes of loose material, insert posts, and fill annular space <br /> between post and concrete with nonshrink, nonmetallic grout, mixed and placed to comply with <br /> anchoring material manufacturer's written instructions . <br /> B . Cover anchorage joint with flange of same metal as post, welded to post after placing anchoring material. <br /> 3 . 5 ATTACHING RAILINGS <br /> 3 . 6 ADJUSTING AND CLEANING <br /> A. Clean stainless steel by washing thoroughly with clean water and soap and rinsing with clean water. <br /> 3 . 7 PROTECTION <br /> A. Protect finishes of railings from damage during construction period with temporary protective coverings <br /> approved by railing manufacturer. Remove protective coverings at time of Substantial Completion. <br /> END OF SECTION 05521 <br /> Wabasso Beach Park 05521 - 7 <br /> Indian River County <br /> DAA Project No . 6008 <br />