Laserfiche WebLink
SECTION 07610 - SHEET METAL ROOFING <br />PART 1 - GENERAL <br />1.1 <br />1.2 <br />1.3 <br />RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and <br />Division 1 Specification Sections, apply to this Section. <br />SUMMARY <br />A. Section Includes: <br />1. Standing -seam metal roofing, on-site, roll formed. <br />B. Related Sections: <br />1, Division 7 Section "Sheet Metal Flashing and Trim" for fasciae, and flashings that are not part of <br />sheet metal roofing. <br />2. Division 7 Section "Joint Sealants" for field -applied sealants adjoining sheet metal roofing. <br />PERFORMANCE REQUIREMENTS <br />A. General Performance: Sheet metal roofing system including, but not limited to, metal roof panels, cleats, <br />clips, anchors and fasteners, sheet metal flashing integral with sheet metal roofing, fascia panels, trim, <br />underlayment, and accessories shall comply with requirements indicated without failure due to defective <br />manufacture, fabrication, installation, or other defects in construction. Sheet metal roofing shall remain <br />watertight. <br />B. Thermal Movements: Provide sheet metal roofing that allows for thermal movements from ambient and <br />surface temperature changes. Base calculations on surface temperatures of materials due to both solar <br />heat gain and nighttime -sky heat loss. <br />1. Temperature Change (Range): 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material <br />surfaces. <br />1.4 SUBMITTALS <br />A. Product Data: For each type of product indicated. Include construction details, material descriptions, <br />dimensions of individual components and profiles, and finishes for each manufactured product and <br />accessory. <br />B. Shop Drawings: Show fabrication and installation layouts of sheet metal roofing, including plans, <br />elevations, expansion joint locations, and keyed details. Distinguish between shop- and field -assembled <br />work. Include the following: <br />1. Details for forming sheet metal roofing, including seams and dimensions. <br />2. Details for joining and securing sheet metal roofing, including layout of fasteners, cleats, clips, <br />and other attachments. Include pattern of seams. <br />Wabasso Beach Park 07610-1 <br />Indian River County <br />DAA Project No. 6008 <br />